Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

my dyno sheet

Thread Tools
 
Search this Thread
 
Old Dec 18, 2007, 03:28 PM
  #16  
Evolved Member
iTrader: (3)
 
ethan169's Avatar
 
Join Date: Mar 2007
Location: Connecticut / Vermont
Posts: 562
Likes: 0
Received 0 Likes on 0 Posts
holy leanness batman, i feel like those numbers are higher for those mods untuned?
no?

i only got 280awhp with tbe and intake 295tq
Old Dec 18, 2007, 05:45 PM
  #17  
Evolved Member
iTrader: (1)
 
Redline-Z's Avatar
 
Join Date: Jul 2006
Location: Sacile, Italy
Posts: 759
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by ethan169
holy leanness batman, i feel like those numbers are higher for those mods untuned?
no?

i only got 280awhp with tbe and intake 295tq
If you have HFC subtract about .8 from your tailpipe sniffer, even then you are way lean. Also, the downward jumps you are seeing are possibly from knock over 5 counts and it will get worse! Get that thing tuned or get an email flash from a good vendor on here for minimal money. Also DL Evoscan or Mitsulogger and log that thing STAT! You are not even close to the right track and need to get your car fixed ASAP.
Old Dec 18, 2007, 06:04 PM
  #18  
Evolved Member
iTrader: (16)
 
EvoJoeIX's Avatar
 
Join Date: Apr 2007
Location: Maryland
Posts: 3,574
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by ethan169
holy leanness batman, i feel like those numbers are higher for those mods untuned?
no?

i only got 280awhp with tbe and intake 295tq
his car obviously isnt untuned if hes in the 14 area WOT....

my car is untuned and my AFR is below 10.0 at WOT and it wont even register on my AEM wideband
Old Dec 18, 2007, 06:12 PM
  #19  
Evolved Member
iTrader: (1)
 
Redline-Z's Avatar
 
Join Date: Jul 2006
Location: Sacile, Italy
Posts: 759
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by EvoJoeIX
his car obviously isnt untuned if hes in the 14 area WOT....

my car is untuned and my AFR is below 10.0 at WOT and it wont even register on my AEM wideband
Pig rich is the way they come! To the people that say don't install an intake you'll run lean, are Idiots! Add a fuel pump and watch that number drop even more
Old Dec 18, 2007, 07:15 PM
  #20  
Evolved Member
iTrader: (15)
 
rcheung's Avatar
 
Join Date: Oct 2004
Location: East Coast
Posts: 2,203
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Redline-Z
Pig rich is the way they come! To the people that say don't install an intake you'll run lean, are Idiots! Add a fuel pump and watch that number drop even more
So your saying running an intake will not make you run leaner? Are we talking about a cone style intake and not just the filter replacement?
Old Dec 19, 2007, 08:26 AM
  #21  
Evolved Member
iTrader: (2)
 
9sec9's Avatar
 
Join Date: Jan 2006
Location: Oklahoma
Posts: 3,275
Likes: 0
Received 1 Like on 1 Post
AFR's don't even appear to be correct for the track of the hp/tq. Notice how the AFR finally gets to 14 area and hp/tq do not respond to the 'improvement'. Much more than AFR is the problem.
Old Dec 19, 2007, 08:35 AM
  #22  
Evolved Member
iTrader: (6)
 
TeStUdO's Avatar
 
Join Date: Jun 2005
Location: Secret Tweaker Pad
Posts: 1,988
Received 41 Likes on 25 Posts
Originally Posted by Redline-Z
Pig rich is the way they come! To the people that say don't install an intake you'll run lean, are Idiots! Add a fuel pump and watch that number drop even more
Thanks for being so ignorant. If you install a conical filter, it will very likely throw off your MAF readings. That in turn, will make your ECU think there is a different load on the engine and use a different part of your fuel map. That, plus the agressive timing the stock ECU has, will make you run lean.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GTaker
04-06 Ralliart Engine/Drivetrain
15
Aug 19, 2011 09:00 PM
turbozee
Evo Engine / Turbo / Drivetrain
7
Aug 27, 2007 01:43 PM
Thugline
Evo Engine / Turbo / Drivetrain
19
Jun 16, 2007 01:52 PM
RedEvolution8
Evo General
9
Oct 30, 2005 10:07 AM
Alfriedesq
Evo General
52
Apr 18, 2003 03:05 AM



Quick Reply: my dyno sheet



All times are GMT -7. The time now is 03:27 PM.