Dyno tune tomorrow
#31
Evolved Member
Thread Starter
iTrader: (3)
Join Date: Jun 2006
Location: Panama City, FL
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
It hits very hard on the street. Brandon and I set the cams to -4/-1 (I wish I could get the exact specs on the Helix cams) due to my style of driving.
Funny thing happend while the car was on the dyno. This guy walks up just as Mase starts the pull. Rev.. rev.. exhaust note changes and the car pulls really hard. Guy looks over and says what cams you got in that thing sounds like it has VTEC. LOL
Razorlab should pat himself on the back. Mase said for a guy that hand not touched my car you had the GM3port dialed in nearly perfect. First try no less!
Funny thing happend while the car was on the dyno. This guy walks up just as Mase starts the pull. Rev.. rev.. exhaust note changes and the car pulls really hard. Guy looks over and says what cams you got in that thing sounds like it has VTEC. LOL
Razorlab should pat himself on the back. Mase said for a guy that hand not touched my car you had the GM3port dialed in nearly perfect. First try no less!
#32
Evolved Member
iTrader: (4)
Join Date: May 2007
Location: Hurlburt Field, FL
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
quick lying steven your car was built on a wed. LOL, yeah I always wonder why I didnt pull on that much on the streets compared to other stock turbo evo's in town. your freaking car has VTEC :P j/k, you have pretty good setup man. I will say his car pretty quick on the streets and his fast *** shifting too
#34
Evolved Member
iTrader: (8)
Join Date: Apr 2003
Location: Georgia
Posts: 2,138
Likes: 0
Received 0 Likes
on
0 Posts
Well I cant believe it. Have a look.
350.1whp and 303ftlb @ 20-21psi. Base line (in red) (23psi) was 338whp and 290ftlb. Mase said I have the highest HP stock turbo/ECU Evo VIII he has ever had on his dyno. I am over the moon. HAPPY HAPPY!!! 8)
Mase estimated 320whp. On the first pull he stopped, came over and said somethings not right. What mods do you have again because you just made 338 base line! 8)
Just goes to show you how good Bnice01's ROAD TUNE was. You the man Brandon! :mrgreen:
Oh and MASE, what a nice guy and the Stage6 guys were very nice and kept us entertained will we waited for MASE to finish up a RSX he was tuning.
350.1whp and 303ftlb @ 20-21psi. Base line (in red) (23psi) was 338whp and 290ftlb. Mase said I have the highest HP stock turbo/ECU Evo VIII he has ever had on his dyno. I am over the moon. HAPPY HAPPY!!! 8)
Mase estimated 320whp. On the first pull he stopped, came over and said somethings not right. What mods do you have again because you just made 338 base line! 8)
Just goes to show you how good Bnice01's ROAD TUNE was. You the man Brandon! :mrgreen:
Oh and MASE, what a nice guy and the Stage6 guys were very nice and kept us entertained will we waited for MASE to finish up a RSX he was tuning.
#37
Not so much,
The total correction was 1.03 for yesterday.
I leave my dyno at x=1.05. it had a atm. correction of .98 yesterday
thus 1.03 total.
if you take it uncorrected. its still 339 whp.
if you own a dd you would also know that depending upon your strapping method, it can change the power output.
Mase
P.S. not that it matters because we shouldnt even be trying to compare dd to dynojet numbers (they read totally different), but on average if you take a car off my dyno and put it on a dynojet its 10-12 % higher max power on a dynojet. We've tested this several times being I used to have a DJ in my shop as well as my DD.
The total correction was 1.03 for yesterday.
I leave my dyno at x=1.05. it had a atm. correction of .98 yesterday
thus 1.03 total.
if you take it uncorrected. its still 339 whp.
if you own a dd you would also know that depending upon your strapping method, it can change the power output.
Mase
P.S. not that it matters because we shouldnt even be trying to compare dd to dynojet numbers (they read totally different), but on average if you take a car off my dyno and put it on a dynojet its 10-12 % higher max power on a dynojet. We've tested this several times being I used to have a DJ in my shop as well as my DD.
Last edited by Mase; Jan 21, 2008 at 12:25 PM.
#40
Evolved Member
Thread Starter
iTrader: (3)
Join Date: Jun 2006
Location: Panama City, FL
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
Not so much,
The total correction was 1.03 for yesterday.
I leave my dyno at x=1.05. it had a atm. correction of .98 yesterday
thus 1.03 total.
if you take it uncorrected. its still 339 whp.
if you own a dd you would also know that depending upon your strapping method, it can change the power output.
Mase
P.S. not that it matters because we shouldnt even be trying to compare dd to dynojet numbers (they read totally different), but on average if you take a car off my dyno and put it on a dynojet its 10-12 % higher max power on a dynojet. We've tested this several times being I used to have a DJ in my shop as well as my DD.
The total correction was 1.03 for yesterday.
I leave my dyno at x=1.05. it had a atm. correction of .98 yesterday
thus 1.03 total.
if you take it uncorrected. its still 339 whp.
if you own a dd you would also know that depending upon your strapping method, it can change the power output.
Mase
P.S. not that it matters because we shouldnt even be trying to compare dd to dynojet numbers (they read totally different), but on average if you take a car off my dyno and put it on a dynojet its 10-12 % higher max power on a dynojet. We've tested this several times being I used to have a DJ in my shop as well as my DD.
If anyone would like to start a DD vrs Dynojet vrs Mustang thread have it at. Just lets not do it in my thread.
#45
Evolved Member
Thread Starter
iTrader: (3)
Join Date: Jun 2006
Location: Panama City, FL
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
I think they are trying to set up a date on our local forum www.southeasternawd.com