threw 2 codes after cam install (rich idle)
#1
Account Disabled
Thread Starter
iTrader: (28)
Join Date: Jul 2006
Location: ft. walton beach, FLORIDA
Posts: 1,115
Likes: 0
Received 0 Likes
on
0 Posts
threw 2 codes after cam install (rich idle)
ok i swapped out my bc 272 cams for some comp 280s, i also threw on some arp head studs(the one by one method)
ive installed tons of cams and head studs and have never had this problem.
im getting a super rich idle and
DTC P0113: Intake Air Temperature Circuit High Input
DTC P0108: Barometric Pressure Circuit High Input
when my ignition is on and my car is off i clear the codes and they come right back, i checked all my connections and everything is good.
my timing is perfect and my cas is on the right way.
i know its probably something stupid i looked over but its 3am and i cant thinlk straight.. any ideas?
ive installed tons of cams and head studs and have never had this problem.
im getting a super rich idle and
DTC P0113: Intake Air Temperature Circuit High Input
DTC P0108: Barometric Pressure Circuit High Input
when my ignition is on and my car is off i clear the codes and they come right back, i checked all my connections and everything is good.
my timing is perfect and my cas is on the right way.
i know its probably something stupid i looked over but its 3am and i cant thinlk straight.. any ideas?
Thread
Thread Starter
Forum
Replies
Last Post
BadazzCR
Evo Engine / Turbo / Drivetrain
3
Aug 23, 2008 07:40 AM