RREvo-8

iTrader: (1)

Ok everyone I did a search and no luck. So pretty much I wsa cleaning out my garage and found an old evo 8 turbo I bought a while back and noticed the hotside number casted on the side is 78-13010 115 The question is, is this really just a 9.8 hotside? In size it seems that way but just wanna make sure.
Thanks in advance.

20Grockit

iTrader: (10)

what is the code on the compressor housing. it should either have a 9.8t or a 10.5t on it.

RREvo-8

iTrader: (1)

The code ends in 9.8t on the compresor housing, but Im not sure if the person I bought it from switched out the hotside? Like I said it looks smaller than my 10.5 hotside, but I wasnt sure.

EvoDan2004

iTrader: (94)

he said he bought it used. so it may of been changed. it can be a 10.5hs while the comp side says 9.8. the hotside i be leave also says 10.5 or 9.8

20Grockit

iTrader: (10)

yes true. just actually noticed that he bought it used. well it should also say on the hotside somewhere what size it is. good luck.

RREvo-8

iTrader: (1)

the only numbers on the turbo are 78-13010 115, these numbers are on flange

EvoDan2004

iTrader: (94)

i thought when i got mine it said 10.5 on it as well.

maybe the 9.8 did not say nothing and the 10.5 did.

20Grockit

iTrader: (10)

you could try looking it up maybe on mitsubishis site. i dont know if they have technical info like that on there or not though.

eponti

iTrader: (12)

My hotside has 12 numbers stamped and the last 3 is 10.5

RREvo-8

iTrader: (1)

called mitsubishi parts and they didn't know anything, told me to call a turbo shop ..thanks mitsubishi

EvoDan2004

iTrader: (94)

if it does not say 10.5 then its most likely a 9.8. the 10.5 hot sides say it

eponti

iTrader: (12)

Also i think the 9.8 is not a single flapper compaired to the 10.5.

20Grockit

iTrader: (10)

there are twin flapper 10.5 hotsides

sparky

iTrader: (1)

I have a 9.8 HS somewhere in the garage. I'll check it for you tomorrow when I get back home. The 10.5 HS has the numbers "105" cast onto the foot of the housing. The 9.0 housing which I just installed does not have the number "90" cast onto the housing though. So, maybe the 9.8 doesn't either.

RREvo-8

iTrader: (1)

No luck yet? Anyone?