HTA TURBO'S CHECK IN,HTA-35R,3076,-3065- T4Z 88mm-ect-ect-
#107
Evolved Member
iTrader: (13)
Join Date: Jan 2006
Location: Las Vegas and HATING it
Posts: 2,916
Likes: 0
Received 1 Like
on
1 Post
Is this the turbo you got Jeff? T4Z 88HTA
http://store.forcedperformance.net/m...e=Lancer-Turbo
http://store.forcedperformance.net/m...e=Lancer-Turbo
I will be sleepless thursday... I just hope it turns up.
#109
will a 3076hta be better than a Fp green
at spool and power?
off topic those pictures of the
driven innovations inlet manifolds
appear to have no injector bosses/holes?
at spool and power?
off topic those pictures of the
driven innovations inlet manifolds
appear to have no injector bosses/holes?
#112
happy/well sort of new hta owner
Bought the turbo kit from ETS with the 3.5" FMIC with a HTA3076..turbo ended up being bad..wheel was rubbing on the comp housing but ETS was great and shipped me a perfectly good HTA the same day after they were contacted. I have a crappy iphone pic but regardless I'm excited Downpipe is coated, hotside is coated, manifold will be coated after speed element custom fits the stock shield to it ..yes I live in California so must hide the goodies..
#113
Evolved Member
iTrader: (16)
Join Date: Apr 2006
Location: Twin Cities, MN
Posts: 888
Likes: 0
Received 0 Likes
on
0 Posts
HTA37r/fp88hta checking in. Don't make as much power as you guys. I need an AEM! 350whp/270wtrq on 22psi 92 octane w/phantom knock on a DD. Can barely run mid-12's with my driving.
Last edited by RedLanEVO; Sep 20, 2008 at 05:31 PM.
#117
Account Disabled
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
don't think I updated my entry:
HTA3586 .82 @ 40psi on Q16 through the stock ecu and mas, I ran out of fuel pressure and wasn't able to bump up the timing, it's pretty low right now (pump gas timing map)
HTA3586 .82 @ 40psi on Q16 through the stock ecu and mas, I ran out of fuel pressure and wasn't able to bump up the timing, it's pretty low right now (pump gas timing map)
#120
Evolved Member
iTrader: (39)
You have to remember that Mellon has used that tool from the beginning so its very accurate to him as far as comparing each stages of mods he has done. Its a great way to log improvements from parts and tuning he has done along the way.