Max power with evo 9 with stock turbo with mods on pump gas only?
#2
Evolving Member
iTrader: (10)
Join Date: Jan 2008
Location: Phoenix
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
I dynoed at 340awhp, and i can do quite a few more things... there is another thread about this but i cant remember where... they said theirs been ppl who made 500+ on a stock turbo.
#6
Evolving Member
Join Date: Sep 2006
Location: Poughkeepsie, NY
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#12
iTrader: (10)
I'm guessing that 30psi one was not on just pump gas.
I would guess around 330-340whp on dyno dynamics is possible on pump gas only. Throw E85 or a nice alky injection kit into the mix and I have seen 380whp (dyno dynamics again). Just do all the basic stuff, then port exhaust stuff and SS o2 housing, ported IM/TB, etc. GM BCS helps a lot too. Lots of little ways to get power!
I would guess around 330-340whp on dyno dynamics is possible on pump gas only. Throw E85 or a nice alky injection kit into the mix and I have seen 380whp (dyno dynamics again). Just do all the basic stuff, then port exhaust stuff and SS o2 housing, ported IM/TB, etc. GM BCS helps a lot too. Lots of little ways to get power!
#13
Evolved Member
iTrader: (3)
Join Date: Jul 2007
Location: Nashville, TN
Posts: 951
Likes: 0
Received 0 Likes
on
0 Posts
https://www.evolutionm.net/forums/sh...d.php?t=324952
391 WHP @26 PSI. That's the best I can find right now. I find 400 WHP stock turbo hard to believe, but not impossible. Just use enough boost.
When the new O2 dumps come out, that may be enough to bring LilRico over the 400 WHP barrier.
391 WHP @26 PSI. That's the best I can find right now. I find 400 WHP stock turbo hard to believe, but not impossible. Just use enough boost.
When the new O2 dumps come out, that may be enough to bring LilRico over the 400 WHP barrier.
#15
481whp 455tq. . .although not sure if its on pump
http://www.youtube.com/watch?v=rMTo_y6Yihk
http://www.youtube.com/watch?v=rMTo_y6Yihk