I'm going to be running a 50mm tial BOV on my twin scroll HTA35R. Hoping it will work well. I'm sure you will hear if it doesnt work. Good luck on your choice.

 

when I had my 35r on I tried the FORGE BOV but the part throttle drivablity was horrible. I tried all different kinds of shims and springs but nothing worked. It leaked like crazy too so I had it all JB-welded up to try and stop it...

switched to the metal MR BOV and everything felt great again.

 

Tial 50mm on my baby 35r

SQ

 

IX Valve

 

I use a Tial 50mm on my stock ECU and Stock IX turbo with not a single issue at 30+ PSI!!! Performed better then the Forge I had and of course it's a lot louder!!!

 

tial is the best bet!!! i think they have released there recirculated unit as well ( dont know for sure or how good it holds boost)

 

evo 9 BOV, holds 28psi all day long

 

tial baby!!!

 

Yup, i'm interested to see how that recirc works from Tial myself. Was thinking on getting one to replace my Forge to see how it works.

 

Get a Tial standalone or no standalone I run one without a standalone and it works fine...

 

stock ecu - forge

standalone - tial

 

anyone you wants use a stock 9

 

Your right but my car came with the plastic BOV, not just mine all of my firends here in my country have the same plastic BOV.

ooh I forogt to mention our evo's are EDM.

 

no problems with aps bov

 

TiAL FTW.