Freddy302

iTrader: (29)

My Trans is out and I want to replace the syncro's whiles it out. I'm in the Northeast and wanted to know what parts I should order and who I should get them from.

Thanks,
Freddy

gsrboi80

iTrader: (38)

Just send it to Dog Box in NJ

Freddy302

iTrader: (29)

thx for the reply.. I want to replace the syncro's myself. Just didnt know the best place to get parts at a good price and semi local to speed the process up.

gsrboi80

iTrader: (38)

Oh no doubt sorry misunderstood. Just order new ones from mitsu thats what all the builders use anyway

4kinboost

iTrader: (10)

Pm me. I'll see what discount you can get through Toplevel.

Paul Nelson

iTrader: (1)

Get them thru the dealer they can have them in a day or might have them in stock. Tell them your with a shop and you want a discount

Freddy302

iTrader: (29)

Thanks For the replies guys.. I Let you know what ends up working for me.. thx

Juan MR

iTrader: (2)

can the synchros be ordered or do u have to order the entire gear set say a 4th gear

dsmfan95

iTrader: (27)

You can order the synchros separately. I got the 5th/reverse synchro, so I can fix the 5th gear grind problem.

Freddy302

iTrader: (29)

Hey Do these parts seem right? I just didnt know how many of each as well.. thx

Quantity Part # Description


MD748058 Ring+m.t Synch

MR581382 Ring+m.t Synch

MD770348 Ring Assy+m.t 3rd

MN168934 Ring Assy+m.t Rev

MR581385 Ring Assy+m.t 2nd

highhats

iTrader: (6)

Send it to jackstransmissions.com on an exchange basis


Suman

Freddy302

iTrader: (29)

Thx Suman! I will def take a look into that option.. Looks like a killer trans at a very fair price.

Mitsutech56

1-2 Synchronizer Sleeve MD749220 qty 1 <--- Only needed if the points are rounded
1st gear synchro & 2nd gear synchro MD770748 qty 2
1st gear synchro spring & 2nd gear synchro spring MD748670 qty 2

For 2nd- to-3rd gear shift grinding noise, use the following new, improved parts:

3-4 Synchronizer Sleeve MR581388 qty 1
3rd Synchronizer Ring MD770348 qty 1
3rd Synchronizer Spring & 4th Synchronizer Spring MR581389 qty 2

For 4th- to-5th gear shift grinding noise, use the following new, improved parts:

5-Rev Synchronizer Sleeve MN168859 qty 1
5th Synchronizer Ring MR581382 qty 1
5th Synchronizer Spring & Reverse Synchronizer Spring MR581383 qty 2
Reverse Synchronizer Ring MN168934 qty 1

Factory Liquid gasket MD997740 qty 1 <---- the only stuff I use

The 3,4,5 & Rev parts are from TSB-04-22-003REV
Parts listed in this bulletin must be used together. Do not install new parts with earlier parts.

PM me if you have any questions.

jmelocik

iTrader: (153)

Great info! What years does that TSB apply to? If I am grinding going from 4th to 5th will the dealer replace or rebuild it under warranty? Thanks again.

Josh

jmartinez1170

iTrader: (21)

just buy it from TRE and do it yourself