Kelford Idle. Cold start right after clutch installed.

 

how do you know this. and wtf did you say??? HAHAH

how can you grind a cam and then regrind it removing degrees?? where?

 

Buschur grinds the ignition timing off the exhaust valvestem seals. But only on the intake. :Everyone knows this.










J/K- the post makes as much sense as the quoted one.

 

Lets see the cam doctor sheet on this since you are making a statement here... show PROOF!

 

 

He was joking ^^ did you not read?

 

This coming from the same guy who had a machine shop attempt to copy a Buschur head, and says he won't run a single Buschur product yet has the Buschur springs on the head Please do not trash a vendor in my thread, don't need that kind of input w/out any proof, so be gone, thank you.

Evodan, let me know how well it goes, i know you'll be having John tune it for ya, i may try the BR cams w/my Green for kicks.

 

+1,000,000,000,000

Jspec, I have a set of these cams as well... I'm going to be running them .. but I'm not sure if I'm going to be running them on stock ecu or on an AEM

Go with BF 272s

 

no problem jspec

 

Glad you will trust Martin's and my word anyday, thank you. You should have run our head then instead of attempting to have it copied.

Been nice to see the BF272 cam run in that test, I could have sold even more of them than I do now!

 

I placed an order for the BR stage 3 head the other day so when that comes in I'll also be putting in the BF 272's I have in a box here. I'll be sure to get some idle/wot vids and DLL overlays to compare it to the stock head/hks 280 on my HTA 35R

 

GRRRR! Sounds mean. Are thoses 272s on stock valvetrain? Driving impressions?

 

http://www.youtube.com/watch?v=dSkDP_TUqSg