I have been driving around and occasionally under wot when i pushed the clutch in it would stick and i would bring it up and it would work fine. So i was driving today and pushed the clutch in and it didnt come back up. The clutch seems non existant. We tried changing the lines out thinking that it was just losing pressure. when ever the clutch is pressed now it just goes straight to the floor and doesn't come up unless pulled back up.

 

hum...did you check your master cylinder fluid level in the engine bay?

 

you have air in the line...
bleed it out, it will probably take a while too

if that dont work, try a new slave cylinder

 

This guy is probably right ^^^^^^^^^^

 

ı use it like that 3 4 for mounths with the same problem clutch center has air when youtake air out no problem will stay.

 

Alright, actually as i was typing this the guys got everything working. They had to pump the freaking clutch like 1000 times to get ALL the air bubbles out..but they got it. Thanks all.

 

...yeah, I would take this guy's advice. He said it pretty confidentially.

 

My friend and i think its the slave cylinder easy fix

 

He already fixed it.