Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

FP Red, E85, 454hp/408tq @ 26psi

Thread Tools
 
Search this Thread
 
Old Sep 23, 2008 | 11:31 PM
  #106  
mpfcc's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 133
Likes: 0
From: Colorado Springs, CO
Originally Posted by projectevo9
That's not much higher than the FP green!

Old Sep 24, 2008 | 12:58 AM
  #107  
mpfcc's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 133
Likes: 0
From: Colorado Springs, CO
I'm optimistic the tune is going to change but I am unsure. I'm hoping that the leaks were present when the original tune took place. I don't know if maybe the coupler slipped off on one of the 6 WOT runs since I picked the car up. I don't know if the FP Red is capable of hitting 29 psi with that big of a boost leak, but who knows. What are the chances the coupler would have slipped off in the 7 mile drive to the shop to get a boost leak? lol Also with that big of a boost leak the AFR's would be rich not lean like they were... I guess another tuning session will tell if this boost leak was present during the original tune, we shall see. I don't care if I gain anymore power just as long as my AFR's are richened up to 11.5 - 12.2(max) range. I really just want to enjoy my new found power before winter hits.

Old Sep 24, 2008 | 07:05 AM
  #108  
TwStDeVo's Avatar
Evolved Member
iTrader: (62)
 
Joined: Oct 2003
Posts: 1,672
Likes: 0
From: 5o5
Originally Posted by 94AWDcoupe
A good tuner checks for boost leaks before the tune.
+1!! Or atleast check things out after the tune when things didnt seem right. i was actually really looking forward to your results! guess im still interested to see what happens after they look over the car again.

Last edited by TwStDeVo; Sep 24, 2008 at 04:51 PM.
Old Sep 24, 2008 | 07:39 AM
  #109  
mpfcc's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 133
Likes: 0
From: Colorado Springs, CO
Originally Posted by TwStDeVo
i was actually really looking forward to your results, wish you would have just went to Tobz!
I would like to keep my pistons, head, valves from melting j/k
Old Sep 24, 2008 | 07:53 AM
  #110  
EpicEVO's Avatar
Former Sponsor
 
Joined: Apr 2008
Posts: 254
Likes: 0
From: Parker, CO
Lucas will take care of it as he stated... He made a mistake by not checking for boost leaks but, he has openly said it was a mistake.. He has stepped up and paid for it to get tested and is going retune the car on his dyno.. Mistakes happen, even though they shouldn't it is possible for it to happen, but when they do happen you want to make sure the company stands behind you.. Like Lucas is doing..

I look forward to seeing the results after the problem is fixed, very nice build again, and congrats on the progress so far!!!

Mark
Old Sep 24, 2008 | 09:15 AM
  #111  
tobz's Avatar
Former Sponsor
iTrader: (15)
 
Joined: Aug 2004
Posts: 379
Likes: 0
From: Denver, Colorado
Awesome Numbers! That car must feel awesome on the street. Cant wait to play with a Red.

Nice Job Guys
Old Sep 24, 2008 | 11:44 AM
  #112  
zedevo's Avatar
Evolved Member
iTrader: (1)
 
Joined: Apr 2008
Posts: 598
Likes: 1
From: KSA
My goal on my Green to reach the 500bhp= 450whp on Race gas ....
ILL post for u the dyno graph !
HOPE SO !
Old Sep 24, 2008 | 12:30 PM
  #113  
Wicked E's Avatar
Evolved Member
iTrader: (26)
 
Joined: Oct 2007
Posts: 1,989
Likes: 0
From: Colorado Springs, CO
Originally Posted by mpfcc
I would like to keep my pistons, head, valves from melting j/k
Awesome!!!

-E
Old Sep 24, 2008 | 04:56 PM
  #114  
TwStDeVo's Avatar
Evolved Member
iTrader: (62)
 
Joined: Oct 2003
Posts: 1,672
Likes: 0
From: 5o5
Originally Posted by mpfcc
I would like to keep my pistons, head, valves from melting j/k
i didnt mean to offend you with the tobz comment and have removed it from my post, just said that as i have seen results from other cars he has tuned and wanted to see how a red turns out, im sure i will be able to do this in the future. i apologize if it seemed offensive.

as for this comment you made, well guess im just going to keep my mouth shut as i dont want to start a post war in your thread, although it is hard for me to hold back!
Old Sep 24, 2008 | 05:33 PM
  #115  
mpfcc's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 133
Likes: 0
From: Colorado Springs, CO
hence the j/k...

I don't side with one camp or the other... I'm an Evo owner excited about my new goodies, I could care less about what goes on between tuners in this state, it's none of my business. The way I see it, is if the state of Colorado had only one good tuner, our tunes wouldn't reach full potential. Competition is good!

Please just keep me out of any Tobz vs. whoever tune, it's not my cup of tea. Yes, I did take your comment as a blow against who I chose to tune my vehicle. My comment you mention was meant to serve two purposes. One - lighten up your comment with a joke, Two - make a point that people make mistakes i.e.- melt a motor, miss a boost leak.


It's all good and appreciate your apology.


Originally Posted by TwStDeVo
i didnt mean to offend you with the tobz comment and have removed it from my post, just said that as i have seen results from other cars he has tuned and wanted to see how a red turns out, im sure i will be able to do this in the future. i apologize if it seemed offensive.

as for this comment you made, well guess im just going to keep my mouth shut as i dont want to start a post war in your thread, although it is hard for me to hold back!
Old Sep 26, 2008 | 04:24 PM
  #116  
mpfcc's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 133
Likes: 0
From: Colorado Springs, CO
Final Numbers...for real

505 hp / 455 tq @ 29 psi, AFR's have been fixed, 11.9 - 12.2 ish throughout the RPM's... Safe tune to stay at for a stock bottom end...

Thanks again to the guys at Carz Performance...Lakewood, CO. Stand up guys who take care of their customers!
Old Sep 26, 2008 | 04:41 PM
  #117  
zedevo's Avatar
Evolved Member
iTrader: (1)
 
Joined: Apr 2008
Posts: 598
Likes: 1
From: KSA
Originally Posted by mpfcc
505 hp / 455 tq @ 29 psi, AFR's have been fixed, 11.9 - 12.2 ish throughout the RPM's... Safe tune to stay at for a stock bottom end...

Thanks again to the guys at Carz Performance...Lakewood, CO. Stand up guys who take care of their customers!

Nice results man ...
Old Sep 26, 2008 | 04:53 PM
  #118  
Evolution IVGSR's Avatar
Evolved Member
iTrader: (42)
 
Joined: Dec 2006
Posts: 1,720
Likes: 1
From: Utah, SLC
SICK I am thinking about going down from the 35R now on my Evo to the FR Red and I have about the same modes as you. I like the numbers and the turbo is a lot less laggy
Old Sep 26, 2008 | 04:54 PM
  #119  
TTP Engineering's Avatar
Account Disabled
iTrader: (465)
 
Joined: May 2005
Posts: 8,824
Likes: 2
From: Central FL
That AEM work out for ya?

Originally Posted by mpfcc
Updated thread with new numbers, this was with 1 big boost leak and 1 small boost leak, retune without boost leaks by end of week...

FP Red w/ 18 psi hp actuator
Kelford 272/272 cams
HKS Adjustable cam gears
BC springs, retainers
ARP head studs
Turbo XS FMIC
AMS LICP
HKS UICP
PTE 1200cc Injectors
BR Double Pumper
Evo Power Mods O2 Dump Housing
BR 3” DP
BR 3” test pipe
BR 3” catback
HKS SSQ BOV
Exedy twin cermic HD clutch
AEM EMS
Sparktech Pro coil on plug
Hallman MBC
BR ported/coated exhaust manifold

Non Mods List:

Stock intake manifold
Stock head (no porting)
Stock shortblock
Stock Turbo Air inlet pipe
Stock throttle body
Stock ignition system and coils
Old Sep 26, 2008 | 05:14 PM
  #120  
mpfcc's Avatar
Thread Starter
Evolving Member
iTrader: (3)
 
Joined: Jul 2007
Posts: 133
Likes: 0
From: Colorado Springs, CO
Yes, works great as far as I know. Was able to go from 454hp/408 tq @ 26psi, to 505hp/455 tq @ 29 psi on AEM with the car not having the silly issues the stock ecu and maf system had...thank you!

Originally Posted by TTP Engineering
That AEM work out for ya?


Quick Reply: FP Red, E85, 454hp/408tq @ 26psi



All times are GMT -7. The time now is 07:19 PM.