i need a turbo!!
#77
Evolving Member
iTrader: (1)
Join Date: Mar 2007
Location: pleasanton, ca
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
https://www.evolutionm.net/forums/sa...low-miles.html
there's my FS thread, and 2 pics put up
was lookin for 1200 out of it. 2k miles on it.
goodluck w/ your build eitehr way!
there's my FS thread, and 2 pics put up
was lookin for 1200 out of it. 2k miles on it.
goodluck w/ your build eitehr way!
#80
Evolved Member
iTrader: (14)
Join Date: Sep 2007
Location: The Stream Of Carol , IL
Posts: 1,095
Likes: 0
Received 1 Like
on
1 Post
+1 for being an international evo owner, mama huevo!!!!!!!!!
my college buddies were venezuelan and peruvian.
#83
Kemoly, you should have your injectors flow tested and no the rods are not supposed to be purple like that.
Me personally don't like to use the stock rod on forged pistons due to the fact that on evos aftermarket rods and pistons are full float wrist pins and the stock ones are pressed in.
and have your machine shop check the block to see it you can bore it to the next piston size.
#84
Evolved Member
iTrader: (13)
well you can check out www.amsperformance.com , www.extremeturbosystems.com , www.greddy.com , www.hksusa.com , www.hopupracing.com , www.findit.com .............. i recommend ETS.
#85
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: Peru
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
you are correct !
when i rebuild my engine i flowed the injectors and they were fine , the problem was the fuel pump.! i was running lean when boost were at 1.5 bar now i got a walboro 255 and everything is good i hope when i put my Green everything keeps thats way ! also i got my block in 0.20 85.5 !
thanks
when i rebuild my engine i flowed the injectors and they were fine , the problem was the fuel pump.! i was running lean when boost were at 1.5 bar now i got a walboro 255 and everything is good i hope when i put my Green everything keeps thats way ! also i got my block in 0.20 85.5 !
thanks
Kemoly, you should have your injectors flow tested and no the rods are not supposed to be purple like that.
Me personally don't like to use the stock rod on forged pistons due to the fact that on evos aftermarket rods and pistons are full float wrist pins and the stock ones are pressed in.
and have your machine shop check the block to see it you can bore it to the next piston size.
Me personally don't like to use the stock rod on forged pistons due to the fact that on evos aftermarket rods and pistons are full float wrist pins and the stock ones are pressed in.
and have your machine shop check the block to see it you can bore it to the next piston size.
#87
Account Disabled
iTrader: (17)
We've got TONS of turbochargers in stock! All kinds of sizes and power ratings! shoot me an email if you'd like some info. mar@slowboyracing.com
-Marti
-Marti