Who's running BF 272's in a stroker?
#17
Evolved Member
iTrader: (6)
Join Date: Sep 2003
Location: Knoxville Tennessee
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
i run them on my daily drivable 2.3 liter stroker engine. it idles fine if ya have a stand alone. prolly even if ya didnt also
Last edited by Johnboy1065; Oct 4, 2008 at 01:38 AM.
#19
Evolved Member
iTrader: (6)
Join Date: Sep 2003
Location: Knoxville Tennessee
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
well, the thing is I did that a long with a few more mods so I can't really tell how much just the cams helped out. If do know it is an amazing increase over my HKS 272's I had in the car originally (which is no supprise)
Before I was making 416 on pump gas on buschur's mustang dyno.
after I added the BF272 cams, Buschur stage 3 ported/polished head, and converted my standard GT35R to a HTA GT35R I was making 508 on pump gas. So that's a 92 HP increase. I'd have to say the cams was a lot of that power increase. great spoolup with these cams and great power.
here is the thread about it
https://www.evolutionm.net/forums/sh...d.php?t=358877
I think the only thing holding me back from making more power on race gas was my .63 a/r turbine housing. I think I need the .82 with a stroker engine
Before I was making 416 on pump gas on buschur's mustang dyno.
after I added the BF272 cams, Buschur stage 3 ported/polished head, and converted my standard GT35R to a HTA GT35R I was making 508 on pump gas. So that's a 92 HP increase. I'd have to say the cams was a lot of that power increase. great spoolup with these cams and great power.
here is the thread about it
https://www.evolutionm.net/forums/sh...d.php?t=358877
I think the only thing holding me back from making more power on race gas was my .63 a/r turbine housing. I think I need the .82 with a stroker engine
#20
well, the thing is I did that a long with a few more mods so I can't really tell how much just the cams helped out. If do know it is an amazing increase over my HKS 272's I had in the car originally (which is no supprise)
Before I was making 416 on pump gas on buschur's mustang dyno.
after I added the BF272 cams, Buschur stage 3 ported/polished head, and converted my standard GT35R to a HTA GT35R I was making 508 on pump gas. So that's a 92 HP increase. I'd have to say the cams was a lot of that power increase. great spoolup with these cams and great power.
here is the thread about it
https://www.evolutionm.net/forums/sh...d.php?t=358877
I think the only thing holding me back from making more power on race gas was my .63 a/r turbine housing. I think I need the .82 with a stroker engine
Before I was making 416 on pump gas on buschur's mustang dyno.
after I added the BF272 cams, Buschur stage 3 ported/polished head, and converted my standard GT35R to a HTA GT35R I was making 508 on pump gas. So that's a 92 HP increase. I'd have to say the cams was a lot of that power increase. great spoolup with these cams and great power.
here is the thread about it
https://www.evolutionm.net/forums/sh...d.php?t=358877
I think the only thing holding me back from making more power on race gas was my .63 a/r turbine housing. I think I need the .82 with a stroker engine
Thread
Thread Starter
Forum
Replies
Last Post
EVO8LTW
Evo Engine / Turbo / Drivetrain
10
Oct 28, 2011 12:53 PM
David Buschur
Evo Engine / Turbo / Drivetrain
159
Jan 3, 2008 02:07 AM
rACerS
Evo Engine / Turbo / Drivetrain
4
Nov 10, 2005 08:38 PM