BUschur Stage 3 long block Full race 4088r ...Kansai
#33
Account Disabled
iTrader: (17)
Join Date: Jun 2008
Location: SO. CO.
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
If you are concerned at all about spool characteristics, you may want to reconsider that 4094R in favor of a 4088R. The 4094R tends to be laggy for the power it produces, and I haven't seen any results from one that I've found particularly impressive. Just a word of advice.
#36
Evolved Member
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: on earth
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the kind coments guys...
I will try get some Vids of some highway pulls !!
I want to change my fuel setup, gonna pull out the Buschur double pumper and run
Bosch 044 with swirl pot.
I will try get some Vids of some highway pulls !!
I want to change my fuel setup, gonna pull out the Buschur double pumper and run
Bosch 044 with swirl pot.
#37
Evolved Member
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: on earth
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
here is a dyno graph of the first runs.
24 PSI
this is on DYNA PACK and in kw...
x kw by 1.36 to get to HP.
torque peak on dyno is the same as my AMS 30r.
once we crank the boost up to 35-40 PSi it will move higher.
24 PSI
this is on DYNA PACK and in kw...
x kw by 1.36 to get to HP.
torque peak on dyno is the same as my AMS 30r.
once we crank the boost up to 35-40 PSi it will move higher.
#43
Evolved Member
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: on earth
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
Soon Soon...
gonna be tuned next week for some BIG BOOST 35psi+
Thanks mate...
it is most def on the wheels...
stock evo 9 on this dyna pack puts down 165kw
converted we end up with 506hp and 434 ft/lbs
2.5 bar is gonna be insane...
gonna be tuned next week for some BIG BOOST 35psi+
Thanks mate...
it is most def on the wheels...
stock evo 9 on this dyna pack puts down 165kw
converted we end up with 506hp and 434 ft/lbs
2.5 bar is gonna be insane...