Pics of Buschur double pumper installed please
Nov 4, 2008, 10:30 AM
#47
Evolved Member
iTrader: (10)
Join Date: Mar 2005
Location: Chicago
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
where did u guys get the "T" adaptor to install the hobbs switch? it didnt come with the kit, can the appropriate size be bought locally??
did u guys run the power wire under the car and upto the pump or did u run it through the firewall and under the carpet?
thanks, going to put this in today hopefully.
how did u guys apply 6 psi of pressure to the hobb swich to see if the pump works?
did u guys run the power wire under the car and upto the pump or did u run it through the firewall and under the carpet?
thanks, going to put this in today hopefully.
how did u guys apply 6 psi of pressure to the hobb swich to see if the pump works?
Nov 5, 2008, 08:39 PM
#51
Here are the updates pics of the wiring job for the fuel pumps.
Wired a relay into the system for the AEM.
Just need to do some finishing connections and then Sean will tune it in the next few days. I'll be out of town w/ the fiance (B-Day).
Wired a relay into the system for the AEM.
Just need to do some finishing connections and then Sean will tune it in the next few days. I'll be out of town w/ the fiance (B-Day).
Nov 5, 2008, 09:19 PM
#52
Evolved Member
iTrader: (26)
Join Date: Oct 2007
Location: Colorado Springs, CO
Posts: 1,989
Likes: 0
Received 0 Likes
on
0 Posts
Patrick-
Would you mind sharing with me which wire you tapped into for AEM activation? Also, I can't make out where the relay was mounted to. I have everything ready to go but not sure which wire to tap into for activation.
Good job on the hole and grommet for the wire.
-E
Would you mind sharing with me which wire you tapped into for AEM activation? Also, I can't make out where the relay was mounted to. I have everything ready to go but not sure which wire to tap into for activation.
Good job on the hole and grommet for the wire.
-E
Nov 6, 2008, 12:28 PM
#53
Evolved Member
iTrader: (8)
Join Date: Dec 2004
Location: West Chester, OH
Posts: 1,347
Likes: 0
Received 0 Likes
on
0 Posts
speedevil - I'm on the road coming home from SEMA, so I can't get a picture now. That picture in the other thread made by Dr. SS shows the port I'm talking about.
Nov 12, 2008, 11:28 AM
#54
Patrick-
Would you mind sharing with me which wire you tapped into for AEM activation? Also, I can't make out where the relay was mounted to. I have everything ready to go but not sure which wire to tap into for activation.
Good job on the hole and grommet for the wire.
-E
Would you mind sharing with me which wire you tapped into for AEM activation? Also, I can't make out where the relay was mounted to. I have everything ready to go but not sure which wire to tap into for activation.
Good job on the hole and grommet for the wire.
-E
I'll get more info for you today when i get to the shop.
The relay is mounted near the foot area (heel) in the driver's side rear.
Nov 13, 2008, 08:40 AM
#58
Didn't get to tune the car last night as we had a customer w/ a 9 that was getting some injs and a tune but he had the wrong set of plugs in his car.
So i gave him mine as he needed to get to L.A. this morning.
Hope to have #'s tonight or tomorrow.
