Forced Performance Turbo Reliability
#1
Forced Performance Turbo Reliability
Can anyone who has had an FP turbo failure post here, and explain what happened. There was some talk on the MLR about Green failures and there is apparently 4 known failures there recently which seemed a large number since they don't run that turbo as much as in the states.
I myself have had an issue where it started to sound a bit noisy on spin down and needed to replace the CHRA on my 35R HTA. However I was running 41 psi and later found a cracked t-piece so I don't necessarily blame FP for the failure.
I know Celica2Evo recently had a failure with an HTA.
9sec9 had a Green failure.
Can others please post details. I don't mean to slate FP but reliability is pretty important to me and I want to get a sense of what is happening.
I myself have had an issue where it started to sound a bit noisy on spin down and needed to replace the CHRA on my 35R HTA. However I was running 41 psi and later found a cracked t-piece so I don't necessarily blame FP for the failure.
I know Celica2Evo recently had a failure with an HTA.
9sec9 had a Green failure.
Can others please post details. I don't mean to slate FP but reliability is pretty important to me and I want to get a sense of what is happening.
#4
If not many people reply to this thread, well then I have a more comfortable feeling running my HTA. Do you mind if I occupy a slot on your precious board to satisfy my curiousity or will you be calling the thread police?
#6
I've been pleased with their support.
I had one of the first batch of HTA 35R's and the anti-surge cover blew off. They fixed it for free with one day turn around.
Then I had the issue with the CHRA and they gave me a decent price on the new CHRA. But after running 41 psi I didn't even ask to get it for free so just paid.
Both those failures had my car down for a long time though since I'm in the Caribbean. Certainly could have done without them.
I had one of the first batch of HTA 35R's and the anti-surge cover blew off. They fixed it for free with one day turn around.
Then I had the issue with the CHRA and they gave me a decent price on the new CHRA. But after running 41 psi I didn't even ask to get it for free so just paid.
Both those failures had my car down for a long time though since I'm in the Caribbean. Certainly could have done without them.
#7
Trending Topics
#8
Evolved Member
iTrader: (10)
Join Date: May 2004
Location: Milwaukee
Posts: 2,679
Likes: 0
Received 0 Likes
on
0 Posts
The first batch of HTA 35r's that had blew due to compressor housings were not FP's fault, that was a machining problem from TiAL. Everyone that had the problem was taken care of.
#9
Evolved Member
iTrader: (83)
crcain, you've got a well deserved reputation for stirring up controversy for no reason in many of your previous posts. This thread continues down the same road.
You've already admitted that you don't blame FP for the failure of your 35R HTA, so its apparent that your starting this thread had nothing to do with helping your level of "comfort".
Your HTA has a Garrett CHRA, and the bearings are not modified by FP, only the compressor wheel changed out. So, if there was a CHRA failure, it would have nothing to do with FP's workmanship anyway. Again, no information about "comfort" could be provided.
Greens are journal bearing turbos, not a ball bearing CHRA like your 35R. Again, no useful information, because its apples to oranges in the bearing department.
Threads like these also provide no useful points of comparison, because you only hear from a few of the product owners, thus there is no capability to measure failure rates because there are hundreds or thousands of good turbos that are not considered; in addition, there is no real way to evaluate WHY a failure occurred when the vast majority of customers do not have the knowledge or experience to tell you why something failed.
That's why I said threads like this are stupid -- they have no predictive value even if you are asking about the same turbo you have -- which you are not...
You're the kind of customer that makes smart businesses put you on a "no-sell-to" ****list before you even call them to order.
You've already admitted that you don't blame FP for the failure of your 35R HTA, so its apparent that your starting this thread had nothing to do with helping your level of "comfort".
Your HTA has a Garrett CHRA, and the bearings are not modified by FP, only the compressor wheel changed out. So, if there was a CHRA failure, it would have nothing to do with FP's workmanship anyway. Again, no information about "comfort" could be provided.
Greens are journal bearing turbos, not a ball bearing CHRA like your 35R. Again, no useful information, because its apples to oranges in the bearing department.
Threads like these also provide no useful points of comparison, because you only hear from a few of the product owners, thus there is no capability to measure failure rates because there are hundreds or thousands of good turbos that are not considered; in addition, there is no real way to evaluate WHY a failure occurred when the vast majority of customers do not have the knowledge or experience to tell you why something failed.
That's why I said threads like this are stupid -- they have no predictive value even if you are asking about the same turbo you have -- which you are not...
You're the kind of customer that makes smart businesses put you on a "no-sell-to" ****list before you even call them to order.
#11
there have been a few failures of the FP Green in the UK, I am not sure how many were direct FP supplied and Turbo Dynamics(UK FP Distributor) supplied
I had an FP Green, purchased from Vivid, and have not had one problem with it's reliability
I had an FP Green, purchased from Vivid, and have not had one problem with it's reliability
#12
Evolved Member
iTrader: (37)
Can anyone who has had an FP turbo failure post here, and explain what happened. There was some talk on the MLR about Green failures and there is apparently 4 known failures there recently which seemed a large number since they don't run that turbo as much as in the states.
I myself have had an issue where it started to sound a bit noisy on spin down and needed to replace the CHRA on my 35R HTA. However I was running 41 psi and later found a cracked t-piece so I don't necessarily blame FP for the failure.
I know Celica2Evo recently had a failure with an HTA.
9sec9 had a Green failure.
Can others please post details. I don't mean to slate FP but reliability is pretty important to me and I want to get a sense of what is happening.
I myself have had an issue where it started to sound a bit noisy on spin down and needed to replace the CHRA on my 35R HTA. However I was running 41 psi and later found a cracked t-piece so I don't necessarily blame FP for the failure.
I know Celica2Evo recently had a failure with an HTA.
9sec9 had a Green failure.
Can others please post details. I don't mean to slate FP but reliability is pretty important to me and I want to get a sense of what is happening.
Think before you post your nonsense.
#13
crcain, you've got a well deserved reputation for stirring up controversy for no reason in many of your previous posts. This thread continues down the same road.
You've already admitted that you don't blame FP for the failure of your 35R HTA, so its apparent that your starting this thread had nothing to do with helping your level of "comfort".
Your HTA has a Garrett CHRA, and the bearings are not modified by FP, only the compressor wheel changed out. So, if there was a CHRA failure, it would have nothing to do with FP's workmanship anyway. Again, no information about "comfort" could be provided.
Greens are journal bearing turbos, not a ball bearing CHRA like your 35R. Again, no useful information, because its apples to oranges in the bearing department.
Threads like these also provide no useful points of comparison, because you only hear from a few of the product owners, thus there is no capability to measure failure rates because there are hundreds or thousands of good turbos that are not considered; in addition, there is no real way to evaluate WHY a failure occurred when the vast majority of customers do not have the knowledge or experience to tell you why something failed.
That's why I said threads like this are stupid -- they have no predictive value even if you are asking about the same turbo you have -- which you are not...
You're the kind of customer that makes smart businesses put you on a "no-sell-to" ****list before you even call them to order.
You've already admitted that you don't blame FP for the failure of your 35R HTA, so its apparent that your starting this thread had nothing to do with helping your level of "comfort".
Your HTA has a Garrett CHRA, and the bearings are not modified by FP, only the compressor wheel changed out. So, if there was a CHRA failure, it would have nothing to do with FP's workmanship anyway. Again, no information about "comfort" could be provided.
Greens are journal bearing turbos, not a ball bearing CHRA like your 35R. Again, no useful information, because its apples to oranges in the bearing department.
Threads like these also provide no useful points of comparison, because you only hear from a few of the product owners, thus there is no capability to measure failure rates because there are hundreds or thousands of good turbos that are not considered; in addition, there is no real way to evaluate WHY a failure occurred when the vast majority of customers do not have the knowledge or experience to tell you why something failed.
That's why I said threads like this are stupid -- they have no predictive value even if you are asking about the same turbo you have -- which you are not...
You're the kind of customer that makes smart businesses put you on a "no-sell-to" ****list before you even call them to order.
As to whether a 35R has anything to do with a Green because one is journal versus ball bearing? Who cares. They both are modified by FP that is the relationship.
As you can see, my interest in this is not specific to my turbo failure. It is specific to whether I recommend a Green or Red to people as a "reliable" solution or not. I've got very close friends with s202, two evo 6, evo 5, three evo 7s, evo 9, evo X, etc... And yes I am curious if I am gonna have another issue with mine seeing as how I've had two already in the space of a year and half.
#14
Do you really have nothing better to do??? Every other post of yours is stirring up some type of $hit. How many turbo's do you think FP has sold, half the damn evo population has them. What a few 3-4 turbos failed....wow. I have heard more factory stock turbos failing....must mean Mitsubishi make unreliable turbo's
Think before you post your nonsense.
Think before you post your nonsense.
If FP was so kind, they'd simply post the sales versus failure ratio of each model. Absent that I'm just trying to get some friggen FEEDBACK ON A PRODUCT which the last time I checked this forum was for you nagging whiners.
#15
Moderators I think it would be fair to clean this thread up and just keep it about people reporting success or failure. FP is a terrific product this is in no way meant to stir anything up. I genuinely am interested in peoples experiences.