Info on turbo upgrade people running "4088R" Chim in plz ;)
#18
Evolved Member
iTrader: (1)
Join Date: Nov 2008
Location: Midwest
Posts: 707
Likes: 0
Received 0 Likes
on
0 Posts
The power that DSMer made on a 4088 is VERY impressive, because the turbo is rated for ~700hp. I think a good upgrade would be something like the HTA 37R/T04Z because it should do better than a 4088, and you could keep your T3 manifold.
Last edited by ScorpionT; Nov 12, 2008 at 10:14 AM.
#20
Evolved Member
iTrader: (7)
Join Date: Dec 2006
Location: on earth
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
I am running Full race stup on a 2.3.
I don't think you will make outright more power with a 4088, but one thing is for sure it will out spool and be a better drivers car than the 850r.
I get 22psi at 4100 rpm with FR kit and GSC S2 cams.
and i am 5500ft above sea level.
the 4088 spools as quick as my AMS 30r setup as on a 2L
I don't think you will make outright more power with a 4088, but one thing is for sure it will out spool and be a better drivers car than the 850r.
I get 22psi at 4100 rpm with FR kit and GSC S2 cams.
and i am 5500ft above sea level.
the 4088 spools as quick as my AMS 30r setup as on a 2L
#23
I am running Full race stup on a 2.3.
I don't think you will make outright more power with a 4088, but one thing is for sure it will out spool and be a better drivers car than the 850r.
I get 22psi at 4100 rpm with FR kit and GSC S2 cams.
and i am 5500ft above sea level.
the 4088 spools as quick as my AMS 30r setup as on a 2L
I don't think you will make outright more power with a 4088, but one thing is for sure it will out spool and be a better drivers car than the 850r.
I get 22psi at 4100 rpm with FR kit and GSC S2 cams.
and i am 5500ft above sea level.
the 4088 spools as quick as my AMS 30r setup as on a 2L
Have you ever looked at the 4094?
#24
Evolved Member
iTrader: (7)
Join Date: Dec 2006
Location: on earth
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
here check this out
I have posted on another thread some where else.
3rd Gear 4600rpm.
this is at 5500ft above sea level
altitude is a killer.
but like i said before I dont think you will make much more top end power with a 4088, but you will def have more area under the graph.
I have posted on another thread some where else.
3rd Gear 4600rpm.
this is at 5500ft above sea level
altitude is a killer.
but like i said before I dont think you will make much more top end power with a 4088, but you will def have more area under the graph.
#25
Evolved Member
iTrader: (21)
Join Date: Apr 2006
Location: US of A
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
What is the purpose of the car? Do you just want good whp numbers or good 1/4 mile #'s? Size doesn't always matter as you see people with stock framed turbos running the same times as people with 35/37r's. You should ask the "dude" where you have your car what he has to say...
Im sure you know: WHP= the bigger the better, while good 1/4 is a compromise between lag/weight/whp/wtq
Im sure you know: WHP= the bigger the better, while good 1/4 is a compromise between lag/weight/whp/wtq
Last edited by dsmbruno; Nov 12, 2008 at 12:09 PM.
#26
Evolved Member
iTrader: (7)
Join Date: Dec 2006
Location: on earth
Posts: 943
Likes: 0
Received 0 Likes
on
0 Posts
I should have figures by next week some time, havent got around to tune the car.
was on the dyno a week ago just to check if all is ok and we not having any probs
car did just a smidge over 500hp @ 1.6 bar boost, this is actuator boost.
we ran 4 deg on peak torque and 8 at 7000.
I don't have the dyno sheet but will ask the guy if he could dig it out.
this was on a dyno pack dyno.
there is way more in it with more timing, and then i will crank it up to 40 PSI with race gas.
#28
Account Disabled
iTrader: (102)
Join Date: Jul 2007
Location: Chicago, IL
Posts: 1,086
Likes: 0
Received 0 Likes
on
0 Posts
https://www.evolutionm.net/forums/sh...d.php?t=380322 there u go sharkbite 804 650 tq probably on a 2.0. I don't think your gonna get the power u want on a 2.3 seeing u cant rev up the turbo as high which is actually the whole point of a big turbo to take it higher rpms to make power.
#29
Evolved Member
iTrader: (7)
Join Date: Jul 2006
Location: Kentucky
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
9000rpm isnt enough?
Hes already had a 37r for a long time guys. Why would he want another to4z?
If your really wanting power, i'd go twin scroll T4 4094! also the 4088's do great on scoobies
they don't run near the boost we do. I really don't think i've seen any 4088 dyno numbers above
33psi. You could make the same power you are at 42 @ 31psi with the right manifold and correct
exhaust housing on the 2.3L you will end up with a very nice setup and same power at lower boost
if thats what your looking for!
Hes already had a 37r for a long time guys. Why would he want another to4z?
If your really wanting power, i'd go twin scroll T4 4094! also the 4088's do great on scoobies
they don't run near the boost we do. I really don't think i've seen any 4088 dyno numbers above
33psi. You could make the same power you are at 42 @ 31psi with the right manifold and correct
exhaust housing on the 2.3L you will end up with a very nice setup and same power at lower boost
if thats what your looking for!
Last edited by ONRAILS; Nov 12, 2008 at 02:17 PM.
#30
https://www.evolutionm.net/forums/sh...d.php?t=380322 there u go sharkbite 804 650 tq probably on a 2.0. I don't think your gonna get the power u want on a 2.3 seeing u cant rev up the turbo as high which is actually the whole point of a big turbo to take it higher rpms to make power.