Radiators
#23
Evolving Member
iTrader: (4)
Join Date: Jul 2007
Location: Singapore
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Just received my Mishimoto Evo6 radiator & a few other things yesterday.
Could not wait to fix up the radiator today, together with a set of Evo 6 blue silicone hose.
Did some measurements to reconfirm fitment & sure enough the radiator fitted right into the Evo9's stock mountings.
The Evo6 silicone hoses fitted in as well. The top hose was a little too long so I cut off about 1.5 inches from the thermostat housing end.
Be sure to get the Evo6 set of hoses as the Evo4 & 5 bottom hose's bend is a little too short.
I reckon this radiator setup will solve all the issues about the tubular manifold being too near the top hose.
Check out the pic...
Could not wait to fix up the radiator today, together with a set of Evo 6 blue silicone hose.
Did some measurements to reconfirm fitment & sure enough the radiator fitted right into the Evo9's stock mountings.
The Evo6 silicone hoses fitted in as well. The top hose was a little too long so I cut off about 1.5 inches from the thermostat housing end.
Be sure to get the Evo6 set of hoses as the Evo4 & 5 bottom hose's bend is a little too short.
I reckon this radiator setup will solve all the issues about the tubular manifold being too near the top hose.
Check out the pic...
Last edited by motoxxx55; Jan 17, 2009 at 07:40 AM.