Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

TRE Transmissions.

Thread Tools
 
Search this Thread
 
Old Apr 20, 2009, 06:34 PM
  #76  
Evolving Member
iTrader: (1)
 
ToMuchBoost's Avatar
 
Join Date: Apr 2006
Posts: 264
Likes: 0
Received 0 Likes on 0 Posts
how many people have blown their 6 speed? Does putting a trans cooler help the 6 speed at all? I'm putting a built 2.3 with a hta 35r the 86 one , im hoping my trans can hold the power as long as i dont do constant pulls.
Old Apr 20, 2009, 07:05 PM
  #77  
Evolved Member
iTrader: (33)
 
Mike01gsr's Avatar
 
Join Date: Jul 2006
Location: PA
Posts: 536
Likes: 0
Received 0 Likes on 0 Posts
Yes a tranny cooler would help, cooling plus more fluid capacity, however nobody makes a kit yet!
Old Apr 20, 2009, 07:26 PM
  #78  
Evolved Member
iTrader: (12)
 
SRT-TO-EVO's Avatar
 
Join Date: Jul 2005
Location: Westchester, NY
Posts: 1,404
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by RevMoto
I just got off the phone with Jon@TRE and talked to him about the new gears. He said it is going to cost around $1500 and you get a stronger 3rd and 4th and a final drive similar to a IX 5 speed with an hks 4.11 final drive. Said the transmission should hold the same torque as a built 5 speed.
OMG that's sick news! He's going to have an ***-load of 6 speeds heading his way as soon as this gear set is released.
Old Apr 20, 2009, 11:52 PM
  #79  
Evolved Member
iTrader: (19)
 
RevMoto's Avatar
 
Join Date: Jul 2006
Location: Boca Raton
Posts: 2,041
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Mike01gsr
Wow this is awesome news, so the whole rebuild cost 1500 or is 1500 plus the regular 900?
It is an addition to the 6 speed rebuild. I should have my transmission shipped out in the next two weeks. This is definitely going to hurt my wallet but I am sure the final result will get me loving my evo again.

Also I have been looking over this thread comparing gears to mph. If he is correct and it is like having a IX 5 speed with 4.11 final drive then I don't think you can ask for a better all around transmission. 117 mph in 4th on a 6 speed should be a dream. Here is one of the charts a member made first stock gearing and then with the 4.11 final drive on all models. These are with stock 7k redline shifts and what rpm you reach in the next gear.

Gear . . . . AWD DSM. . . . . . . EVO VIII. . . . . . . . EVO IX. . . . . . . . EVO MR. . . . . . . . JDM CR

1st . . . . . 34.4 (3800) . . . . . 40.0 (4700) . . . . 42.1 (4900) . . . .39.8 (4700) . . . . . 40.0 (4700)

2nd . . . . . 62.8 (4650) . . . . 60.1 (5050) . . . . 60.1 (5200) . . . .59.6 (5200) . . . . . . 60.1 (5050)

3rd . . . . . 94.8 (5250) . . . . . 83.2 (5150) . . . . 81.1 (5300) . . . .80.8 (5350) . . . . . 83.2 (5450)

4th . . . . . 126.9 (5600) . . . 113.6 (4900) . . . 106.9 (4850) . . . .105.3 (5500) . . . .106.9 (5250)

5th . . . . . 158.7 (N/A) . . . . 162.7 (N/A) . . . . 153.9 (N/A) . . . . .133.7 (5600) . . . . .142.0 (N/A)

6th . . . . . N/A (N/A) . . . . . . . . N/A (N/A) . . . . . . N/A (N/A) . . . . .167.1 (N/A) . . . . . . .N/A (N/A)



Gear . . . . EVO VIII. . . . . . . . . EVO IX. . . . . . . . . . EVO MR. . . . . . . . . . JDM CR

1st . . . . . 44.1 (4700) . . . . . 46.3 (4900). . . . . . .44.4 (4700) . . . . . . 44.1 (4700)

2nd . . . . 66.2 (5050) . . . . . . 66.2 (5200) . . . . . .66.4 (5200) . . . . . . 66.2 (5050)

3rd . . . . . 91.7 (5150) . . . . . . 89.4 (5300) . . . . .90.0 (5350) . . . . . . 91.7 (5450)

4th . . . . 125.2 (4900) . . . . . 117.7 (4850) . . . .117.3 (5500) . . . . . .117.7 (5250)

5th . . . . 179.2 (N/A) . . . . . . 169.6 (N/A) . . . . . .149.0 (5600) . . . . . .156.4 (N/A)

6th . . . . N/A (N/A) . . . . . . . . . N/A (N/A) . . . . . . .186.2 (N/A) . . . . . . . . . .N/A (N/A)

Last edited by RevMoto; Apr 21, 2009 at 01:16 AM.
Old Apr 21, 2009, 03:37 AM
  #80  
Evolving Member
iTrader: (4)
 
SpeeDeviL's Avatar
 
Join Date: Jun 2006
Location: Kuwait
Posts: 346
Likes: 0
Received 0 Likes on 0 Posts
GREAT, please more info on the build 6 speed, when well they release the gearset, and is there anyway that I can contact Jon@TRE, I've been e-mailing him for a while now, only got one replay.

I got a 6 speed with 3rd and 4th gone, well ship it to TRE and get it rebuild with a 4.11 FD, GOD I CAN'T WAIT.
Old Apr 21, 2009, 12:15 PM
  #81  
Evolving Member
iTrader: (5)
 
Laxman's Avatar
 
Join Date: Oct 2002
Location: Tucson
Posts: 480
Received 13 Likes on 9 Posts
You can count me in Jon!
Old Apr 21, 2009, 12:35 PM
  #82  
Evolved Member
iTrader: (67)
 
Q8_EVO's Avatar
 
Join Date: Oct 2006
Location: Tucson, AZ
Posts: 1,553
Likes: 0
Received 0 Likes on 0 Posts
subscribed
Old Apr 21, 2009, 01:36 PM
  #83  
Evolving Member
iTrader: (1)
 
ToMuchBoost's Avatar
 
Join Date: Apr 2006
Posts: 264
Likes: 0
Received 0 Likes on 0 Posts
Around what WHP level did you guys start breaking 4th gear?
Old Apr 21, 2009, 01:47 PM
  #84  
Evolved Member
iTrader: (14)
 
bbyevo8u's Avatar
 
Join Date: Jun 2005
Location: NY
Posts: 2,581
Likes: 0
Received 2 Likes on 2 Posts
whats jon's email adress? just in case lol
Old Apr 21, 2009, 02:13 PM
  #85  
Evolving Member
iTrader: (15)
 
frost318's Avatar
 
Join Date: Nov 2005
Location: Louisiana
Posts: 166
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by RevMoto
I wish I can find that thread that compared all the gear ratios with their mph. I want to see the mph per gear on a IX 5 speed with 4.11. I have a 6 speed with a junked 3rd and 4th so not going with the new gears would be the wrong move. It is just really going to hurt to adding another $1500 on top of a rebuild and twin clutch plus install.
I know the feeling. I ordered my rebuild parts last week and come to find out my 1st and 3rd gears are screwed up. So i ended up going change everything and it cost me $1485.68 from mitsubishi. TRE did not have the parts on hand.
Old Apr 21, 2009, 02:23 PM
  #86  
Evolving Member
iTrader: (14)
 
jezzy101's Avatar
 
Join Date: Mar 2008
Location: Strong Island
Posts: 236
Received 2 Likes on 2 Posts
Ready for this!!
Old Apr 22, 2009, 02:44 AM
  #87  
Evolving Member
iTrader: (4)
 
SpeeDeviL's Avatar
 
Join Date: Jun 2006
Location: Kuwait
Posts: 346
Likes: 0
Received 0 Likes on 0 Posts
Well TRE sell the gearset and final drive alone, so I can do my build here??
Old Apr 22, 2009, 03:44 AM
  #88  
Evolving Member
iTrader: (1)
 
ToMuchBoost's Avatar
 
Join Date: Apr 2006
Posts: 264
Likes: 0
Received 0 Likes on 0 Posts
Are their any stronger gear sets for the 6speed that i can order? not just TRE does any other companies make a stronger gear set for the 6 speed?
Old Apr 22, 2009, 06:38 AM
  #89  
Evolving Member
iTrader: (5)
 
icrnk's Avatar
 
Join Date: Sep 2003
Location: Houston
Posts: 325
Likes: 0
Received 0 Likes on 0 Posts
Interested. What's the benefit of chaning the FD? What if the car is not raced, but mearly a fun weekend car? I just want to get my 6th gear fixed and any improvements in strength.
Old Apr 22, 2009, 07:35 AM
  #90  
Evolving Member
iTrader: (5)
 
mitsumanny's Avatar
 
Join Date: Jan 2007
Location: NUNYA
Posts: 208
Likes: 0
Received 0 Likes on 0 Posts
I dont track it but i'd b interested in gettin my 6 speed as bullet proof as possible before anything happens (knock on wood)


Quick Reply: TRE Transmissions.



All times are GMT -7. The time now is 04:02 AM.