9 turbo on an 8 only hitting 24psi...
#16
Evolved Member
iTrader: (14)
Join Date: Mar 2008
Location: underground
Posts: 1,340
Likes: 0
Received 0 Likes
on
0 Posts
i personally think the limit for a 9 turbo spike is 32psi....ive seen shops in this forum that boost 33+ psi on the 9 turbo, which gets them crazy torque power......i personally spike 30psi and hold 21psi to 7500rpm on my 9 turbo with the forge wastegate on e85...
#17
Evolved Member
iTrader: (1)
it kind of seems that way i mean we run 24ish on the evoIII 16g's they are supposed to be at about 14psi stock.... so 10 over stock 30 on the evo 9..... i'd deffinitely make sure it tapered off at higher rpm's.... to get it going it can make 30 psi.
what you want to lower is the turbo's rpm's.... in lower rpm's 30 psi could be about 100,000 rpm's but at 7,500 way higher like 180,000.... those numbers aren't precise or even possibly close i don't know how fast that turbo spins. what i'm trying to say it, always have it taper down at higher rpm's on small turbo's and you should be fine.
Eddie Rosado
#18
Evolving Member
iTrader: (6)
Join Date: Feb 2009
Location: TC, MN
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
it kind of seems that way i mean we run 24ish on the evoIII 16g's they are supposed to be at about 14psi stock.... so 10 over stock 30 on the evo 9..... i'd deffinitely make sure it tapered off at higher rpm's.... to get it going it can make 30 psi.
what you want to lower is the turbo's rpm's.... in lower rpm's 30 psi could be about 100,000 rpm's but at 7,500 way higher like 180,000.... those numbers aren't precise or even possibly close i don't know how fast that turbo spins. what i'm trying to say it, always have it taper down at higher rpm's on small turbo's and you should be fine.
Eddie Rosado
what you want to lower is the turbo's rpm's.... in lower rpm's 30 psi could be about 100,000 rpm's but at 7,500 way higher like 180,000.... those numbers aren't precise or even possibly close i don't know how fast that turbo spins. what i'm trying to say it, always have it taper down at higher rpm's on small turbo's and you should be fine.
Eddie Rosado
#23
Evolved Member
iTrader: (10)
Join Date: Feb 2005
Location: Houston,tx
Posts: 1,913
Likes: 0
Received 0 Likes
on
0 Posts
i have an 8 with bolt ons and cams and a 9 turbo in it that hasnt been tuned yet. ive ran 24psi on it constantly for about a year and a half and they are right. right now i have about a centimeter of shaft play. even untuned i put down 350whp and ran a 12.1 @ 114 on straight 93 with a bad launch though. i always wondered what it would be capable of if i had gotten it tuned but it's time for an upgrade. straight drop in i went from 12.3 @ 110 with a 1.73 60' to a 12.1 @ 114.3 with a subpar launch. mine always tapered to 20 at redline also. id recomend sticking to 24 unless you are using meth, e85, race gas, etc
Thread
Thread Starter
Forum
Replies
Last Post
Knguyen228
Vendor Service / Parts / Tuning Review
3
Jan 3, 2008 01:48 PM