Dead clutch pedal!!!!
Aug 12, 2014, 01:52 PM
#16
Having the same problem right now ! was driving on the highway and suddlenly the clutch went straight to the floor. I could touch it with my pinky and itll drop right away. I didnt see any leaks or nothing like that and it still has fluid. Had to power shift all the way home =/
I bought another slave cylinder, but a local friend that has an evo said that it might be the pin inside the tranny that popped out. How can i clarify that and also when i have the car running it and i try to move the fork to engage the gears i hear a grinding noise, sounds like it slipped off the fly wheel. I need some help my evo brothers !
I bought another slave cylinder, but a local friend that has an evo said that it might be the pin inside the tranny that popped out. How can i clarify that and also when i have the car running it and i try to move the fork to engage the gears i hear a grinding noise, sounds like it slipped off the fly wheel. I need some help my evo brothers !
Aug 12, 2014, 04:37 PM
#18
Evolved Member
iTrader: (11)
Join Date: Jan 2008
Location: Your mamy's bedroom
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
^monolock looks pretty good!
I'm having a problem where the clutch pedal comes up, but is about 2" short of it's maximum height.
There is an tiny leak from the master cylinder against the firewall as the black paint has been stripped from the canister directly under the cylinder, but that doesn't seem to leak enough to have caused the problem.
I'm having a problem where the clutch pedal comes up, but is about 2" short of it's maximum height.
There is an tiny leak from the master cylinder against the firewall as the black paint has been stripped from the canister directly under the cylinder, but that doesn't seem to leak enough to have caused the problem.
Thread
Thread Starter
Forum
Replies
Last Post
