NEED HELP fast. Plug tip broke
#17
well did the compression check. the cylinder the tip broke off was number 2 the 135 and 145
first time did 150 135 145 150
second time 150 145 145 150
Now should i just check the turbo
first time did 150 135 145 150
second time 150 145 145 150
Now should i just check the turbo
#19
try it a third time and see if the numbers from the second run match. If so, then you're ok. That first run does indicate something happening in cylinder 2. If anything, it sounds like a valve may have suffered a little damage. If you can perform a leak-down check for cylinder 2, this would be a more accurate measurement of cylinder integrity. Make sure that cylinder 2 is a Top Dead Center to do this. Once the cylinder is pressurized, listen for hissing. You can also. If you don't have a leak-down tester, take the car to a garage that does have one and ask for a leak-down test
#20
#21
also what is easiest way to check my turbo exhaust side wheel for damage.
Also how much play is acceptable.
Any other suggestions to figure out what is damaged would be greatly appreciated this is my DD
Also how much play is acceptable.
Any other suggestions to figure out what is damaged would be greatly appreciated this is my DD
#22
I've seen this a million times on race bikes, 4G63's, honda's, etc. Its not really a big deal at all. 90% of the time the motor just spits it out without harming the exhaust valve, and the fan blade on the turbo takes a little nick. No biggy. I doubt the compression loss you are seeing is due to the broken plug. NO the plug tip is NOT still in your engine lol.
#23
I've seen this a million times on race bikes, 4G63's, honda's, etc. Its not really a big deal at all. 90% of the time the motor just spits it out without harming the exhaust valve, and the fan blade on the turbo takes a little nick. No biggy. I doubt the compression loss you are seeing is due to the broken plug. NO the plug tip is NOT still in your engine lol.
finally some good news.
so time for a new turbo
#26
Aren't you the guy who just ripped off another member by sending him a glove and a garage door roller in an aem ems box?
I would say the spark plug issue is prolly the least of your worries
https://www.evolutionm.net/forums/ev...ml#post7017571
I would say the spark plug issue is prolly the least of your worries
https://www.evolutionm.net/forums/ev...ml#post7017571
#27
Aren't you the guy who just ripped off another member by sending him a glove and a garage door roller in an aem ems box?
I would say the spark plug issue is prolly the least of your worries
https://www.evolutionm.net/forums/ev...ml#post7017571
I would say the spark plug issue is prolly the least of your worries
https://www.evolutionm.net/forums/ev...ml#post7017571
+1 on that want to see this one..
#29
Aren't you the guy who just ripped off another member by sending him a glove and a garage door roller in an aem ems box?
I would say the spark plug issue is prolly the least of your worries
https://www.evolutionm.net/forums/ev...ml#post7017571
I would say the spark plug issue is prolly the least of your worries
https://www.evolutionm.net/forums/ev...ml#post7017571
#30
i am not a scammer. He is going artound saying things that are not true. He is upset because the outcome but im the one who is out an AEM and now he going around saying things that are not true.