Deatschwerks Injector Service
#1
Newbie
Thread Starter
Join Date: Feb 2004
Location: Wichita Kansas
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Deatschwerks Injector Service
has anyone out there used Deatschwerks for Injector cleaning and flow testing? i used the search function and found lots of information about people using their modified injectors, but did not find much information about their services. i understand ultrasonic cleaning is very generalized and standard, but i have an extra set of PTE injectors, and i'm not 100 percent certain to their size. they're either 750's or 1000's, and figured this would be a good way to find out/get them cleaned at the sametime. thanx in advance to anyone with any input, it's greatly appreciated.
also, these are for my fpred setup i'm pieceing together. going to be pretty basic: fp red, stock cams, aem ems on speed density.
cams will come in time.
also, they're located in oklahoma city, and i'm in wichita, so it'd just be an easy trip to get them dropped off.
again, thank you!
also, these are for my fpred setup i'm pieceing together. going to be pretty basic: fp red, stock cams, aem ems on speed density.
cams will come in time.
also, they're located in oklahoma city, and i'm in wichita, so it'd just be an easy trip to get them dropped off.
again, thank you!
Last edited by kidwitevo; May 5, 2009 at 12:15 AM.