What do I look for in a BOV??
#1
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Mar 2009
Location: San Jose, CA
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
What do I look for in a BOV??
Ok so I decided not to go with an Evo X recirc. Even though it was only 50$. My reasons are my own :P
So I am looking at a few BOVs on craigslist but most of them are from Subarus. Do I just need to purchase the correct flange, or are they totally incompatable???
Also, what do u think about this BOV?
http://portland.craigslist.org/mlt/pts/1150791387.html
"Generic Typr RS BOV with Recirc adapter and horn never installed. It is BRAND NEW!! "
RS? is that a Greddy? I do not want to recirc. Just dump to atmosphere. So if later on down the road I want to try recirc, can I do tat with this BOV? What makes a BOV loud? I allready read a few threads but I am still not in the know =)
So I am looking at a few BOVs on craigslist but most of them are from Subarus. Do I just need to purchase the correct flange, or are they totally incompatable???
Also, what do u think about this BOV?
http://portland.craigslist.org/mlt/pts/1150791387.html
"Generic Typr RS BOV with Recirc adapter and horn never installed. It is BRAND NEW!! "
RS? is that a Greddy? I do not want to recirc. Just dump to atmosphere. So if later on down the road I want to try recirc, can I do tat with this BOV? What makes a BOV loud? I allready read a few threads but I am still not in the know =)
#2
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Mar 2009
Location: San Jose, CA
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Ok so I was looking at a BOV which requires u to purchase a weldon flange AND an HKS EIDS.
Are the EIDS alwawys required when dumping to atmosphere? (To prevent boost surge?) Why do some kits not mention the EIDS?
Are the EIDS alwawys required when dumping to atmosphere? (To prevent boost surge?) Why do some kits not mention the EIDS?
#3
Evolved Member
iTrader: (11)
never run VTA, always Recirculate. EDIS prevent ur car from stalling when u VTA, some evo's run VTA will stall when they come to a complete stop. Look for Bov like APS, Forge ect. search there is bunch of threads on this topic.
Last edited by Kdash106; May 9, 2009 at 01:47 PM.
#4
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Mar 2009
Location: San Jose, CA
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
So I keep seeing advertisements on EVOM about those HKS SSQVs. I guess tehy are better for somone who has a lot of boost. Anyway I see one em on ebay and I wanted to know about this. So it says that it does not come with recirc or a flange adapter.
I can later upgrade to recirc right? Where can I get a flange adapter for it and how much is that gonna be? Last question, this kit doesnt mention anything about the EIDS. Does that mean this is going to be a pain in the *** to daily drive, or can this EIDS thing be purchased also?
I can later upgrade to recirc right? Where can I get a flange adapter for it and how much is that gonna be? Last question, this kit doesnt mention anything about the EIDS. Does that mean this is going to be a pain in the *** to daily drive, or can this EIDS thing be purchased also?
#5
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Mar 2009
Location: San Jose, CA
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
So if one was to VTA, the EIDS is pretty much required right?
Different vaccum setups or spring pretention is not going to help with the bogging problem? The EIDS is about 130$. Is it easy to hook up?
#6
Evolved Member
iTrader: (11)
i had SSQV for a while but sold it because it was PITA to drive around with it, as for the flange, u can get one that will work with evo rubber intake for like 25-30 i think, and u can also get a Recirculated adopter for around the same. EDIS can be purchased too. Like i said, u should look in to APS or forge, if u really want the sound, either one of them has nice sound and get ur self a nice drop in or a cone Filter.
#7
Evolved Member
He says generic in the ad, so its most likely a Chinese/Ebay knock off of a GReddy RS.
Most all Mitsubishis will behave poorly when vented. Some stall and some don't which is why you won't hear of EIDS being mentioned all the time when people vent.
Why were you considering an X BOV? IS that a better upgrade then the IX JDM MR valve?
Most all Mitsubishis will behave poorly when vented. Some stall and some don't which is why you won't hear of EIDS being mentioned all the time when people vent.
Why were you considering an X BOV? IS that a better upgrade then the IX JDM MR valve?
Trending Topics
#9
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Mar 2009
Location: San Jose, CA
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
He says generic in the ad, so its most likely a Chinese/Ebay knock off of a GReddy RS.
Most all Mitsubishis will behave poorly when vented. Some stall and some don't which is why you won't hear of EIDS being mentioned all the time when people vent.
Why were you considering an X BOV? IS that a better upgrade then the IX JDM MR valve?
Most all Mitsubishis will behave poorly when vented. Some stall and some don't which is why you won't hear of EIDS being mentioned all the time when people vent.
Why were you considering an X BOV? IS that a better upgrade then the IX JDM MR valve?
Does EIDS solve the crackhead Evo effect?
#12
Evolving Member
Thread Starter
iTrader: (4)
Join Date: Mar 2009
Location: San Jose, CA
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
You guys have GOT to see this: Its a comparison of BOVs.. Check out @ 51 seconds in to the video!! http://www.youtube.com/watch?v=1T7zglT9KHo
I really think the Turbo XS one is awesome!!! What do u guys think about that one? Here is a link to it: http://www.rallysportdirect.com/shop...lve-p-124.html
Will I have better driveability if I go head an get an EIDS too? are they compatible? How does that work?
I really think the Turbo XS one is awesome!!! What do u guys think about that one? Here is a link to it: http://www.rallysportdirect.com/shop...lve-p-124.html
Will I have better driveability if I go head an get an EIDS too? are they compatible? How does that work?
#13
Evolving Member
iTrader: (10)
Join Date: Dec 2008
Location: NYC
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
i had SSQV for a while but sold it because it was PITA to drive around with it, as for the flange, u can get one that will work with evo rubber intake for like 25-30 i think, and u can also get a Recirculated adopter for around the same. EDIS can be purchased too. Like i said, u should look in to APS or forge, if u really want the sound, either one of them has nice sound and get ur self a nice drop in or a cone Filter.
#15
Newbie
iTrader: (7)
Join Date: Nov 2008
Location: Royse city
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Go with the go fast bits BOV, it recircs and vents to atmo, i use it, you can adjust it to 100 - 0 or 0 to 100, or anywhere in between, i run 25% atmo and 75% recirc on it, never have any stalling problems. and it fits on all the factory hoses, no need to weld random BS