Kevin@MellonTuning's Stock Evo IX Build with pics and DLL dyno numbers
#256
Evolved Member
iTrader: (35)
Well since the last update I've been to the track twice. On e85 I ran a best e.t. of 11.91 and a best mph of 114 out of 3 runs. Went to the track this past Friday and ran a 12.33 @ 109 on 93 oct. We also replaced my TB shaft seals... It was my only leak! Mellon and I were both amazed at how well its sealed up now. We still need to see if its affected the tune... Should get around to that soon.
Not sure if hp changed since but 11.91 with how much WHP?
#261
Former Sponsor
Thread Starter
iTrader: (2)
Join Date: Dec 2008
Location: Houston
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Have you checked out http://www.youtube.com/user/Mellonpopr?
I need to get Mellon to create a vid of my runs at the track.
I need to get Mellon to create a vid of my runs at the track.
#268
Account Disabled
iTrader: (38)
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 9,319
Likes: 0
Received 1 Like
on
1 Post
Kevin removed the stock rubber intake pipe and HKS filter to replace it with the Buschur intake pipe and filter. We found that it made a little more torque at 28psi but dropped it to 27psi to keep the power up top from falling off as much due to heat. (stock fmic ftl!)
nice gains...next up, retuned on e85 and or a LICP. Kevin would have posted this up himself but he's driving us back from MOD
stock intake pipe vs buschur
nice gains...next up, retuned on e85 and or a LICP. Kevin would have posted this up himself but he's driving us back from MOD
stock intake pipe vs buschur
Last edited by Mellon Racing; Sep 27, 2009 at 12:21 PM.