ETS front mount intercooler
#31
why don't you call ETS and just ask them. Tell them about your plans and such. Forums are great, but its hard to weed out good info from bad advice. Just go directly to the source.
#32
Newbie
Thread Starter
I have sent them an email stating my mods and my future mods which will never get close to 350whp! they said go for the 3.5 or even the 4"
I'm still not sure which size is better for my mods. I mean does going bigger provides better cooling which gives more power?
I'm still not sure which size is better for my mods. I mean does going bigger provides better cooling which gives more power?
#34
Evolving Member
iTrader: (13)
Join Date: Jul 2007
Location: North Las Vegas
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Pressure drop will depend on how much power you're making. If you're running the stock turbo at 20-22psi for pump gas and making 300-350whp, pressure drop will be less than 1psi. We rate this 3" intercooler at 80% of its capacity to support 550hp at 1.5psi pressure drop. PM sent on price shipped!
Tom
Tom
https://www.evolutionm.net/forums/ev...ale-499-a.html
#36
Evolved Member
iTrader: (5)
Join Date: Oct 2004
Location: DFW
Posts: 1,123
Likes: 0
Received 0 Likes
on
0 Posts
There is so much mis-information in this thread, that it's disgusting. You do not need to upgrade your IC or injectors unless you are going with a bigger turbo. If you are running meth, then it is not neccessary at all. There are much better mods to spend you money on at your level of modification. At your stage, the LICP will unlock some power, the UICP, and intake will not. If you plan to upgrade your turbo, then all of it will help at the point of the turbo upgrade.
#38
Newbie
Thread Starter
There is so much mis-information in this thread, that it's disgusting
Thanks all for your replies.
#40
Evolved Member
iTrader: (72)
The stocker is known to support up to 400hp, so why are you planning to upgrade. Many of the really fast evos at my I autox with doesn't even have upgraded intercoolers. With that said, a 3" version will be plenty to support your power mods. 3.5 if oyu want to leave some room for improvement, but 4 is overkill for that level of power.
#41
Evolved Member
iTrader: (14)
There is so much mis-information in this thread, that it's disgusting. You do not need to upgrade your IC or injectors unless you are going with a bigger turbo. If you are running meth, then it is not neccessary at all. There are much better mods to spend you money on at your level of modification. At your stage, the LICP will unlock some power, the UICP, and intake will not. If you plan to upgrade your turbo, then all of it will help at the point of the turbo upgrade.
Thread
Thread Starter
Forum
Replies
Last Post