HKS EVC boost controller install
#1
Evolved Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Ocean, NJ
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
HKS EVC boost controller install
Just got my HKS EVC and i'm having some trouble setting it up. Can someone effectively outline how it's supposed to be installed? I'm havign a bit of trouble
thanks!
thanks!
#2
Evolved Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Ocean, NJ
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
Here comes the questions
I'm supposed to have one hose from the actuator and one from the turbo elimating the t setup of the turbo, correct?
I disconnected the hoses from the stock solenoid and one is from the t setup and one is to the nipple of my intake.
Can someone explain the setup of this? Also, on the HKS new solenoid, there is no eching of what is supposed to be connected to what on the nipples...
I'm supposed to have one hose from the actuator and one from the turbo elimating the t setup of the turbo, correct?
I disconnected the hoses from the stock solenoid and one is from the t setup and one is to the nipple of my intake.
Can someone explain the setup of this? Also, on the HKS new solenoid, there is no eching of what is supposed to be connected to what on the nipples...
#3
Evolved Member
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Ocean, NJ
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
More updates
Stupid HKS didn't send me enough 6MM hose, where can I get some more?
There was a hose going from my solenoid to the nipple on my AEM intake, where does that hose go now?
In the manual it says use the t fitting between the BOV and the 3rd small nipple on the new hks solenoid.. is this correct? The tubing doesn't seem to match well...
Stupid HKS didn't send me enough 6MM hose, where can I get some more?
There was a hose going from my solenoid to the nipple on my AEM intake, where does that hose go now?
In the manual it says use the t fitting between the BOV and the 3rd small nipple on the new hks solenoid.. is this correct? The tubing doesn't seem to match well...
Thread
Thread Starter
Forum
Replies
Last Post
Evo11V
Evo Engine / Turbo / Drivetrain
13
Jan 26, 2007 06:25 PM
swordfish
For Sale/WTB - Engine / Drivetrain / Power
4
Aug 14, 2006 01:41 PM