2.2L 4G63 Kits
#31
Evolving Member
iTrader: (3)
All depends on your goals. Skim this thread about the differences between them: http://highboostforum.com/forum/show...for-your-build
It doesnt cover the 2.2L 63 but its more or less the same as a 2.1L. High rev, 10% more displacement. Somewhat the best of both worlds of a 2.3/2.4 and 2.0.
It doesnt cover the 2.2L 63 but its more or less the same as a 2.1L. High rev, 10% more displacement. Somewhat the best of both worlds of a 2.3/2.4 and 2.0.
#33
Evolving Member
iTrader: (3)
I believe once reading about 162/163 (rr 1.72) having acceptable dwell. Any higher than 1.7 really starts posing a problem at high boost levels though.
#36
Former Sponsor
iTrader: (38)
I decided to put together a kit using the overstock CP pistons we have, I think you will find the pricing quite attractive
MAP 2.2L Rotating Assembly
MAP 2.2L Rotating Assembly
#37
Evolving Member
iTrader: (3)
I decided to put together a kit using the overstock CP pistons we have, I think you will find the pricing quite attractive
MAP 2.2L Rotating Assembly
MAP 2.2L Rotating Assembly
#39
Evolved Member
iTrader: (6)
I decided to put together a kit using the overstock CP pistons we have, I think you will find the pricing quite attractive
MAP 2.2L Rotating Assembly
MAP 2.2L Rotating Assembly
#41
Evolving Member
iTrader: (12)
Originally Posted by ChrisCarey
I decided to put together a kit using the overstock CP pistons we have, I think you will find the pricing quite attractive
MAP 2.2L Rotating Assembly
MAP 2.2L Rotating Assembly
I'm working with the 4G64 myself, and its about time to make the decision on which 2.2L setup I go with.
#42
Evolving Member
Join Date: Feb 2011
Location: newzealand
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
#44
Evolved Member
iTrader: (15)
Finally figured out what I'm going to go with if I go this route. Question is, what can I safely rev this to? I know the 2.3 can go to 8500 safely, which is good for about 140mph traps? I'm looking to get a 6466/3788/3794 size turbo and go either 2.0 or 2.2
What can I rev this to?
63 block
Eagle 94mm crank
Manley 150mm turbo tuffs
Manley 2.1/2.2l pistons
Acl bearings
Any info would be great as I'm looking to buy something tonight.
Thank you
Josh
What can I rev this to?
63 block
Eagle 94mm crank
Manley 150mm turbo tuffs
Manley 2.1/2.2l pistons
Acl bearings
Any info would be great as I'm looking to buy something tonight.
Thank you
Josh