Loud Whining Noise
#1
Loud Whining Noise
There is a loud hauling/whining noise that sounds like a fire truck siren. The noise starts when I hit about 20 mph and continues to get louder and higher in pitch the faster I go. It does not matter if the car is in gear or not; or if I hit my brakes. As I come to a stop the noise gets lower in pitch and I start to hear almost like a soft grinding noise. The sound level of the noise dies off a little at about 70 mph but then comes back very loud as I increase my speed. I have a 2004 evo 8 with about 70,000 miles on it. I talked to some techs and they think it my front transfer case is out. But I want to see if anyone here knows what is wrong or it happen to them. Thanks everyone.
#2
Evolving Member
Join Date: Feb 2009
Location: Houston TX
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
No doubt it's the transfer case.. the techs aren't lying, whining noise = your transfercase going out.. either have it rebuilt by shep or get a stock one. It costs about 2k.
#3
Evolving Member
There is a loud hauling/whining noise that sounds like a fire truck siren. The noise starts when I hit about 20 mph and continues to get louder and higher in pitch the faster I go. It does not matter if the car is in gear or not; or if I hit my brakes. As I come to a stop the noise gets lower in pitch and I start to hear almost like a soft grinding noise. The sound level of the noise dies off a little at about 70 mph but then comes back very loud as I increase my speed. I have a 2004 evo 8 with about 70,000 miles on it. I talked to some techs and they think it my front transfer case is out. But I want to see if anyone here knows what is wrong or it happen to them. Thanks everyone.
#10
Newbie
iTrader: (2)
Join Date: Mar 2007
Location: Long Island
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Get the stage 2 from Shepracing.com and it will never break again. I think total is 1700 for stage 2. You just have to ship them yours they will send you a box that it will fit in perfectly to ship. Good Luck man.
#14
Evolving Member
iTrader: (1)
Join Date: Jun 2009
Location: Edm, AB.
Posts: 122
Likes: 0
Received 0 Likes
on
0 Posts
Mine's on it's way back from Shep now, came out to 1600 (stage 2 + ring and pinion r/r) after I grinded my pinion until it was a smooth cone. lol.
the whine wasn't as loud as you are describing yours to be, but over time it may have turned out to be that loud.
the whine wasn't as loud as you are describing yours to be, but over time it may have turned out to be that loud.