dmotors

iTrader: (3)

i planing to purchase camshaft for my evo 9 , but i wich set of cams are beter between the tomei pomcams and the gsc s1 cams
also i have but is not installed the tomei arms turbo

GdotRegEvo9

iTrader: (9)

Kelfords 272s !

AF-Evo8

iTrader: (113)

i've about nothing but good results from the gsc's

sleeper04

iTrader: (26)

cosworths or GSC alot of 9's on here are running and seem to like them do a search...

sparky

iTrader: (1)

GSC S2's, or the Kelford 272's!

big block ix

iTrader: (1)

S2's

yahu

iTrader: (55)

GSC S2s, unless the tomei turbo and tomei cams are specifically engineered to work with each other (which I haven't heard).

BTW - I think I've heard that the GSC S2 and Kelford 272 cams are the same. Can anyone clarify that?

BoostJunky78

iTrader: (7)

+1 for the Kelford 272's. I heard the fp4 are pretty good as well.

yahu

iTrader: (55)

In a shootout the Kelfords and GSCs were pretty much the shizz, over the fp4 and fp5's too. I think that was for an VIII though.

charon2123

iTrader: (23)

I recommend the Kelford's, they are working really well on my IX. Just remember to change out the valve springs (and retainers, if desired) because they have higher lift than stock.

Spoolin' By U

+1 on Kelford 272's or the GSC S2's and of course a valve spring and retainer upgrade.
I also like the Cosworth M3 camshafts as well, there getting alot of positive feedback too.

yahu

iTrader: (55)

^I'm on the Cosi M2's and I like them so far. I'll likely go bigger but I think I might be done until my clutch goes out or I jump to a stroker.

red evo8

iTrader: (58)

cossi 272s on my ix , next cams i would be looking at would be gsc s1 or s2 if bigger turbo. Both are good brands.

usernameinuse

iTrader: (6)

I rock the cosworth m3's and love em. Noticed a bigger difference than I expected with them and a tune.

Drizzy Drake

iTrader: (-4)

FP4rs or cossi M2