I looked it over a few times and it looks pretty solid

 

Thanks!

I forgot to mention that I have a WORKS 3" TBE w/ Resonated Test Pipe.

 

Here is my goal...180-185 at the Texas Mile. My best so far is 167.

The list of parts and most are already on the car.

Built block
Cossie head
GSC S2
FP Black
Blac ops dbl pumper
FIC bluemax 1450
MAP O2 housing w/ dump
ETS FMIC and hard pipes
MAP rev3
E85
V7 w/ SD
X MR rims with 26.4" tire

I'm thinking 600-650whp if not a little more

 

Going to Buschur next month for a custom tune. Mid 11's would make me very happy.

Stock Block and Turbo
BR TBE W/hfc
BR MBC
BR Air Filter Kit
ETS 3" licp/uicp
Megan O2 housing
BR Ported Ex Mani, Intake Mani, TB
Walbro 255
1000CC injectors
HKS 272i/272e

Is it possible?

 

i dont know. i dont see your setup making more then 330 on br's dyno. if you're a good driver you may get it into the 11's. the evo 8 stock turbo is not very good compared to evo9 turbos. is it a 10.5 housing?

do a boost leak test and confirm your parts can withstand atleast 30psi before you go to buschur. the stock bov would be in question im sure. might want to crush the diaphram on it.

edit: if its a plastic bov and not metal it sucks... change it asap. if its the metal bov similar to the ones in 1g dsm's then if you crush it they can handle about 33psi from my experience.

 

The 8 MR came with the metal bov also used on the IX's. I'm only looking to run 22psi at max anyway. It's not important to hit my goal this time around, just curious if I would be close. Thanks for the reply.

I'm a great driver, but I never raced in my life. lol.

 

ok swo i set a date to get dynoed May 1st, i was wondering to all experts what i may be looking at for tq/hp.

mods:
stock motor
stock turbo
255 walbro
880 injecters
upgraded 3.5 intercooler
ams licp
hallman mbc
cobb intake
3 inch dp
perrin hfc
magnaflow 3 in cat back
grimmspeed bcs (mine was messed up only allowed 14 psi)



most of these parts are not installed yet waiting for a couple days before the tune. i would love for it t be a surprise. but i also wanna know if this tuner is good. a couple people i have talked to said they are great but this is my car.

thanks
Sean

 

its an 03 with a 9.8 hotside..

it'll do 300/300 most likely.

 

ok i was maybe hearing a little higher, i was hoping it was between 320-350. i have been researching a lot about it and looking at a lot of dynos and thats the numbers im hoping its between

 

There's a thread for that:

https://www.evolutionm.net/forums/ev...ega-merge.html

 

my fault didnt look around

 

What numbers would i be looking at?

--------------------------------------------------------------------------------

ok swo i set a date to get dynoed May 1st, i was wondering to all experts what i may be looking at for tq/hp.

mods:
stock motor
stock turbo
255 walbro
880 injecters
upgraded 3.5 intercooler
ams licp
hallman mbc
cobb intake
3 inch dp
perrin hfc
magnaflow 3 in cat back
grimmspeed bcs (mine was messed up only allowed 14 psi)



most of these parts are not installed yet waiting for a couple days before the tune. i would love for it t be a surprise. but i also wanna know if this tuner is good. a couple people i have talked to said they are great but this is my car.

thanks
Sean

 

I have a JDM EVO 7 in Pakistan.
I have the following mods installed...

93 octane
8MR Stock turbo
Hks Intake
Hks Carbon TI-Exhaust(with downpipe)
Blitz i-color Boost controller
Walbro 255
Built Block 2.0 ( Carillo Rods and Ross Pistons)
Exedy Twin Plate HD
HKS 272 with BC springs and retainers
ETS 3.5" IC and LP2

what numbers should i expect? and also do i need sumthing else?

 

How much will this make on 93:

4g64 block 2.4l
Wiseco 9:1 pistons
Manley H-beams
arp main and head studs
stock 8 head
BC 280 cams
stock 8 intake mani & tb
stock 8 turbo
stock 8 exh mani
megan o2
3" TBE
780cc PTE
Walbro 255
stock ecu w/ maf
31"x12"x4" intercooler
2.5" intercooler piping

Looking to get 350-400whp with this setup at 28psi or so, before i upgrade the fuel system and install kelford 280s and my 6262 setup and go for 600whp+.

 

anyone?