How much power will my setup make [Mega Merge]
#751
Former Sponsor
iTrader: (22)
boost creep will be more controlled with the invidia o2 as it has a very 3d contoured wastegate area with major opening.
#752
Evolving Member
Join Date: Feb 2011
Location: San Diego
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
whats with it and all you cali guys that go to reese's dyno always asking for number estimates? lol.
i dont know how his dyno reads so i am of no help.. id say on a dynojet 380 on e85 and 310-320 on 91.
i hope you have fuel mods though???? otherwise the e85 is gonna be pegged quick.
i could be way off though.
i dont know how his dyno reads so i am of no help.. id say on a dynojet 380 on e85 and 310-320 on 91.
i hope you have fuel mods though???? otherwise the e85 is gonna be pegged quick.
i could be way off though.
#753
Former Sponsor
iTrader: (22)
Who said I go to Reese tuning? I've never gone there and never will. I actually was going to hit you up for a tune on my car but your profile shows a lot of unanswered emails and unhappy clients. I forgot to put the RC 1000 cc injectors in the mod list. Dyno jet numbers are useless by the way. I want mustang dyno numbers.
unhappy clients what? i have ZERO unhappy clients.. the only thing i have trouble with at the moment is finishing up cars because the customer car ends up having an issue then they take a week or so to get the part to fix the issue and then they come back to me a week later then we get into a communication issue sometimes.
i assure you i don't have any unhappy customers, and if i do they get their full $ returned to them.
If you have the hardware and stuff to get remote tuned by all means contact me and we will schedule a time to get it done. it typically takes 2-3 hours if the car is in sound condition.
I try to gain a personal interest in all my customers, that's why i prefer to talk to them on AOL, or other types of messengers so i can communicate in real time with them as im tuning them.. it creates a bond with the tuner and customer and that is how good results become.
#754
Newbie
absolutely. the invidia o2 is a full 3" o2 housing, it will definitely help a bit. the ets intake should help also and licp will help greatly as well.
boost creep will be more controlled with the invidia o2 as it has a very 3d contoured wastegate area with major opening.
boost creep will be more controlled with the invidia o2 as it has a very 3d contoured wastegate area with major opening.
how much boost you think i can push safely?
#755
Former Sponsor
iTrader: (22)
unbolt the exhaust manifold from the head and undo the downpipe and pull the radiator out drain it first of course.
undo the coolant lines from the turbo, unplug the o2 sensor and break the 4 turbine housing bolts loose but not undo them and pull the turbo out with the o2 housing and exhaust manifold connected to it.. then spray the **** out of the bolts on o2 housing area and dont attempt to break them loose until you let it sit overnight with pb blaster or something strong.
also keep in mind the one stud on the turbo housing will need to be cut alittle shorter to clear the invidia o2 housing and you will need to cut the batch of wires that run along side your fuel rail and get the o2 sensor cable out of that then run it from the driver side down past the front of engine to reach the new location of the o2 sensor bung on the invidia o2 housing. not cutting actual wires but just the tape that they are covered in so you can fish the o2 sensor wire around and reroute it.
hope this helped a bit.
25psi probably wont be an issue if its 93octane fuel, but the MHI turbo can take 30psi all day long.. mitsubishi builds very strong turbos.
#756
Evolved Member
iTrader: (24)
Who said I go to Reese tuning? I've never gone there and never will. I actually was going to hit you up for a tune on my car but your profile shows a lot of unanswered emails and unhappy clients. I forgot to put the RC 1000 cc injectors in the mod list. Dyno jet numbers are useless by the way. I want mustang dyno numbers.
#758
Newbie
iTrader: (7)
Join Date: Oct 2008
Location: Puyallup, WA
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Stock IX block/head/cams
FIC 900cc hi-z's
TurboXS fmic
Injen uicp
ETS 4" intake
Speed Density
Walbro 255(ER modded)
Works 3" DP/Helix test pipe/ETS 3.5" cat back
ETS licp
FP Black(ported)
Forge WGA
Titek o2 housing(ported to 3" outlet)
Ported stock exhaust manifold
92 octane pump
English Racing tune is coming on Sunday
Edit: I made 410whp/332wtq at 26psi. The dyno seemed to be reading about 20whp lower then other normal too. A car was dyno'd a couple days before and was down 20whp when he dyno'd yesterday.
I am happy with the results though.
FIC 900cc hi-z's
TurboXS fmic
Injen uicp
ETS 4" intake
Speed Density
Walbro 255(ER modded)
Works 3" DP/Helix test pipe/ETS 3.5" cat back
ETS licp
FP Black(ported)
Forge WGA
Titek o2 housing(ported to 3" outlet)
Ported stock exhaust manifold
92 octane pump
English Racing tune is coming on Sunday
Edit: I made 410whp/332wtq at 26psi. The dyno seemed to be reading about 20whp lower then other normal too. A car was dyno'd a couple days before and was down 20whp when he dyno'd yesterday.
I am happy with the results though.
Last edited by rockbmx1; Jun 20, 2011 at 09:29 AM.
#759
Evolving Member
iTrader: (6)
I made 347whp/317wtq @25.7 pounds of boost on a dynojet with the mods on my sig. I feel like I should've made more maybe like 360+whp considering the mods I have, but ppl keep saying every car is different which I understand but lots of other ppl are making 360 on fewer mods than me. I know temperature and climate will also make a big difference on power gains but I dont know. Im extremely happy with the tune but wouldve loved to see more power. What do you guys think?
#760
Former Sponsor
iTrader: (22)
I made 347whp/317wtq @25.7 pounds of boost on a dynojet with the mods on my sig. I feel like I should've made more maybe like 360+whp considering the mods I have, but ppl keep saying every car is different which I understand but lots of other ppl are making 360 on fewer mods than me. I know temperature and climate will also make a big difference on power gains but I dont know. Im extremely happy with the tune but wouldve loved to see more power. What do you guys think?
#763
JDM Evo 6
Manley 2.4
Balance Shaft Elimination
Methanol Injection
Complete built head S2 cams
Magnus intake manifold
MAP Stainless Steel O2 Eliminator Downpipe with external dump
Full Blown Cast 70mm Throttle Body
1050 FIC injectors
Bosch 044 motor sport fuel pump
Fuellab fuel regulator kit
GCS S2 cams , AEM cam gears
Full custom 3’’ exhaust with HKS muffler(no cat )
4’’ intercooler ( Ebay !!! )
HKS intake
Halman bro BC
PTE 6765 .82 AR Ported Shroud
MAP twin scroll T4 exhaust manifold with twin Turbosmart WG .
4'' Intake pipe
Sparktech coil on plug non CDI system
what do you think i'll be making on
95 Octan fuel with 20 PSI ?
95 Octan Fuel with 33 PSI and 100 meth ?
What do you think about the lag ? i'm thinking too much about this issue with this turbo !
Manley 2.4
Balance Shaft Elimination
Methanol Injection
Complete built head S2 cams
Magnus intake manifold
MAP Stainless Steel O2 Eliminator Downpipe with external dump
Full Blown Cast 70mm Throttle Body
1050 FIC injectors
Bosch 044 motor sport fuel pump
Fuellab fuel regulator kit
GCS S2 cams , AEM cam gears
Full custom 3’’ exhaust with HKS muffler(no cat )
4’’ intercooler ( Ebay !!! )
HKS intake
Halman bro BC
PTE 6765 .82 AR Ported Shroud
MAP twin scroll T4 exhaust manifold with twin Turbosmart WG .
4'' Intake pipe
Sparktech coil on plug non CDI system
what do you think i'll be making on
95 Octan fuel with 20 PSI ?
95 Octan Fuel with 33 PSI and 100 meth ?
What do you think about the lag ? i'm thinking too much about this issue with this turbo !
#765
Evolved Member
iTrader: (19)
how much hp would you estimate from this setup:
Map stage 1 shortblock w/ wiseco 8.5 cr pistons
Map stage 1 cyl head with supertech dual valve springs, titanium retainers, ss intake/inconel exh valves, std size
GSC S2 cams
stock airbox intake
BBK Full w/ ported hotside
Buschur ported stock exh manifold
ETS licp
ETS standard tank 3" intercooler
ETS short route uicp
FIC 1050cc injectors
DW300 LPH fuel pump
Buschur dp
Mil spec 100 cell cat
Buschur scca legal catback w/ magnaflow muffler
spoolinup cop kit
manual boost controller
tuned at ~28 psi on 91 octane?
tuned at ~28 psi on 100 octane?
Trying to get some input on doing my next build and seeing what you guys think this setup will make at about that psi with those two different fuels.
Thanks in advance.
Map stage 1 shortblock w/ wiseco 8.5 cr pistons
Map stage 1 cyl head with supertech dual valve springs, titanium retainers, ss intake/inconel exh valves, std size
GSC S2 cams
stock airbox intake
BBK Full w/ ported hotside
Buschur ported stock exh manifold
ETS licp
ETS standard tank 3" intercooler
ETS short route uicp
FIC 1050cc injectors
DW300 LPH fuel pump
Buschur dp
Mil spec 100 cell cat
Buschur scca legal catback w/ magnaflow muffler
spoolinup cop kit
manual boost controller
tuned at ~28 psi on 91 octane?
tuned at ~28 psi on 100 octane?
Trying to get some input on doing my next build and seeing what you guys think this setup will make at about that psi with those two different fuels.
Thanks in advance.