How much power will my setup make [Mega Merge]
#798
I am thinking HKS hi-power exhaust, AEM intake, and AEM tru-boost with a tune from English Racing. What kinda numbers do you guys think that'll push on an 06 MR? Also any other basic or good parts you recommend is appreciated!
#800
I was wondering around how much power i would make:
Evo Ix Mr
93 oct
full 3 inch TBE
Gsc s2 cams
megan o2
Perrin air filter
Hallman MBC
licp
1000 injectors
Jestr M1 email tune
Evo Ix Mr
93 oct
full 3 inch TBE
Gsc s2 cams
megan o2
Perrin air filter
Hallman MBC
licp
1000 injectors
Jestr M1 email tune
#801
Evolved Member
iTrader: (11)
What's goin on fellas i need help, i need to know what brand injectors and size i should go with. I was thinking of going with 1200s but that might be over kill for my set up. I daily drive the car on 93 octane. Thanx for the help.
fp green turbo
hks 272 cams
Ets 3.5 i/c
arp head studs
oem head gasket
injen intake with hks air filter
hks exhaust 2.5
255 walboro F/P
stock manifold
stock fly wheel
Clutch might be Act XT
As far as injectors im not sure.
fp green turbo
hks 272 cams
Ets 3.5 i/c
arp head studs
oem head gasket
injen intake with hks air filter
hks exhaust 2.5
255 walboro F/P
stock manifold
stock fly wheel
Clutch might be Act XT
As far as injectors im not sure.
#802
Former Sponsor
iTrader: (22)
What's goin on fellas i need help, i need to know what brand injectors and size i should go with. I was thinking of going with 1200s but that might be over kill for my set up. I daily drive the car on 93 octane. Thanx for the help.
fp green turbo
hks 272 cams
Ets 3.5 i/c
arp head studs
oem head gasket
injen intake with hks air filter
hks exhaust 2.5
255 walboro F/P
stock manifold
stock fly wheel
Clutch might be Act XT
As far as injectors im not sure.
fp green turbo
hks 272 cams
Ets 3.5 i/c
arp head studs
oem head gasket
injen intake with hks air filter
hks exhaust 2.5
255 walboro F/P
stock manifold
stock fly wheel
Clutch might be Act XT
As far as injectors im not sure.
#804
Newbie
iTrader: (2)
Join Date: Dec 2008
Location: East Point, GA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Evo 8
Dual Maps E85/93
Mods:
Evo 9 Turbo
BR Ported Intake Mani
BR Ported Exhaust Mani
Fp4R Cams
ETS 3' IC
BR Full 3' Exhaust/Test Pipe
Megan 02 Housing
Walbro FP
ETS LICP
Grimmspeed BCS
PTE 1200 inj
Forge Wastegate Actuator
Dual Maps E85/93
Mods:
Evo 9 Turbo
BR Ported Intake Mani
BR Ported Exhaust Mani
Fp4R Cams
ETS 3' IC
BR Full 3' Exhaust/Test Pipe
Megan 02 Housing
Walbro FP
ETS LICP
Grimmspeed BCS
PTE 1200 inj
Forge Wastegate Actuator
#806
Evolved Member
iTrader: (8)
AMS Intercooler w/ AMS LICP and UICP
HKS SSQ BOV (recirculated)
Samco Silicone Intake w/ Apexi filter
Megan Racing Exhaust Manifold
10.5 Hotside
Invidia 3" Downpipe
Perrin 3" Test Pipe
HKS Carbon CBE (cat-back exhaust)
BC 280 Cams
HKS Cam Gears
Hallman Pro Boost Controller
Precision 880cc injectors
W255 Pump
Perrin fuel rail
Currently tuned at 22psi, getting tuned to 26psi this sunday
HKS SSQ BOV (recirculated)
Samco Silicone Intake w/ Apexi filter
Megan Racing Exhaust Manifold
10.5 Hotside
Invidia 3" Downpipe
Perrin 3" Test Pipe
HKS Carbon CBE (cat-back exhaust)
BC 280 Cams
HKS Cam Gears
Hallman Pro Boost Controller
Precision 880cc injectors
W255 Pump
Perrin fuel rail
Currently tuned at 22psi, getting tuned to 26psi this sunday
#807
Well the mods i have right now is just fujita intake and uicp, 3 inch xspower downpipe, highflow cat and 3 inch exhaust...im wondering what im getting right now? Also im deploying and thinking of saving 4k for the car.. What can i buy with 4k ? Well my target is atleast to get somewhere close to 11.do i need to spend more?
For the future thanks!!!
For the future thanks!!!
#808
Newbie
iTrader: (26)
Join Date: May 2011
Location: Texas
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Was wondering how much power I would make more or less with these mod's. 03 Evo 8
Mods:
ARC Front Mount Intercooler
Upper ICP
1450 FIC Injectors
Magnus Fuel Rail
Aeromotive 340 Stealth In-Tank Fuel Pump
Works Throttle Body
Evo 9 Turbo with a ported cold side.
Ported Nvidia O2 Housing
HKS Down Pipe 3''
Test Pipe 3''
Cat Back
K&N Intake
HKS 280 cams w/BC Springs/Retainers
Hallman Boost Controller peaking 30psi dropping to 27psi
6-Puck Unsprung Clutch with Fidanza Flywheel
Crushed Metal Evo9 BOV
Going to install a Meth kit soon. Wondering what kind of numbers I should expect on pump gas (93) and then with the Meth Kit installed. Also have a tuner who can tune for E85. May go that route.
Mods:
ARC Front Mount Intercooler
Upper ICP
1450 FIC Injectors
Magnus Fuel Rail
Aeromotive 340 Stealth In-Tank Fuel Pump
Works Throttle Body
Evo 9 Turbo with a ported cold side.
Ported Nvidia O2 Housing
HKS Down Pipe 3''
Test Pipe 3''
Cat Back
K&N Intake
HKS 280 cams w/BC Springs/Retainers
Hallman Boost Controller peaking 30psi dropping to 27psi
6-Puck Unsprung Clutch with Fidanza Flywheel
Crushed Metal Evo9 BOV
Going to install a Meth kit soon. Wondering what kind of numbers I should expect on pump gas (93) and then with the Meth Kit installed. Also have a tuner who can tune for E85. May go that route.
Last edited by z32cctx; Sep 11, 2011 at 09:33 AM.
#809
Evolved Member
iTrader: (21)
Hmm... what power will I be making on 92 oct and 100 oct?
Power mods:
ETS intake piping w/ ~8" K&N air filter
SD tune
synapse recirc
BR ported intake manifold and throttle body
BR ported exhaust manifold
HKS GTII 7460r turbo
Perrin Intercooler
Spoolinup COP
AMS 3" turboback
GSC S2 cams
Megan O2 housing
ETS LICP
FIC 1050cc injectors
Walbro 255lph fuel pump
AEM TruBoost for boost control
I am thinking it will probably be 410-420whp/380ft-lbs on 92 octane and ~480awhp/440ft-lbs on 100 octane.
Power mods:
ETS intake piping w/ ~8" K&N air filter
SD tune
synapse recirc
BR ported intake manifold and throttle body
BR ported exhaust manifold
HKS GTII 7460r turbo
Perrin Intercooler
Spoolinup COP
AMS 3" turboback
GSC S2 cams
Megan O2 housing
ETS LICP
FIC 1050cc injectors
Walbro 255lph fuel pump
AEM TruBoost for boost control
I am thinking it will probably be 410-420whp/380ft-lbs on 92 octane and ~480awhp/440ft-lbs on 100 octane.
Last edited by nollij; Sep 11, 2011 at 12:51 PM.
#810
This is just speculation for a build i have planned
2.4 long rod
9.5 wiseco pistons
balance shaft delete
evo 8 head
hx40 turbo
custom turbofold
BC 280s/springs and retainers
ported intake mani
silicone intake
full 3inch exhaust
Speed denstiy on Tephra Mod
HKS SSQV
Thats all i can think of from my plans having a brain fart right now
2.4 long rod
9.5 wiseco pistons
balance shaft delete
evo 8 head
hx40 turbo
custom turbofold
BC 280s/springs and retainers
ported intake mani
silicone intake
full 3inch exhaust
Speed denstiy on Tephra Mod
HKS SSQV
Thats all i can think of from my plans having a brain fart right now