Ryu's hunting for 9's on the Stock Block
Jan 24, 2010, 12:49 PM
#122
Evolved Member
iTrader: (18)
Join Date: Oct 2008
Location: Albany NY
Posts: 1,109
Likes: 0
Received 0 Likes
on
0 Posts
I believe $100 which is very comparable to what every other company charges. As you can see Judge Racing also does far more to the hotside then FP or BR in terms of how far they port the runners. My BR ported FP Red was no where near as wide open as the competitors porting.
Jan 24, 2010, 04:50 PM
#123
Jan 24, 2010, 05:07 PM
#124
Evolving Member
iTrader: (10)
Join Date: May 2006
Location: Tampa Area
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
I believe $100 which is very comparable to what every other company charges. As you can see Judge Racing also does far more to the hotside then FP or BR in terms of how far they port the runners. My BR ported FP Red was no where near as wide open as the competitors porting.
Jan 27, 2010, 08:10 AM
#129
Well, I don't plan to max out the turbo as of yet. I shouldn't need too. I think it's going to take 35psi to reach around the 610-620whp peak mark while maintaining approx. 40whp give or take over the Red on the top end. This is of course theoretical until the car is on the rollers but I am confident my estimation is going to prove very close to what the actual results will end up being. In more of a universal comparison term I expect the car to go from 133mph in the 1/4 mile with the Red to 137-138mph with the turbo and o2 housing changes with 5psi less boost.
Last edited by RyuEvoIX; Jan 27, 2010 at 08:15 AM.
