BLKCarbonEVO

iTrader: (2)

I'm trying to find a 4in. Intake that is as straight as possible and is made to run in a "No MAF" setup. Does anyone know of a company that makes one? Also has anyone done a back to back test 3in. vs. 4in. intake?

Mikey

gotrnet

iTrader: (4)

Dejon makes some. i have one on my 2g. be sure to check the dsm and evo sections.

http://www.dejonpowerhouse.com/

Slovo

iTrader: (1)

I had to make one from Vibrants products, I just bought a 4" straight and a 45 degree bend to see which would work better. They both work pretty well, and then just capped it off with a 4" K&N filter

IDRINKV8'S

Im curious for my self my tuner keeps telling me to throw on a 4inch hks pipe that he has and he saying that it's gonna pick up 10 whp...I guess your going speed density...

psphinx81

iTrader: (38)

call up buschur, they will probably take care of you

BLKCarbonEVO

iTrader: (2)

^ I'm already speed density. I'm going from the 64mm housing to the 80mm housing and wanted to upgrade my 3in. tube to a 4in. I happen to like the Dejon intake tube. Thanks gotrnet.

Mikey

awd2gen

iTrader: (4)

yeah dejonpowerhouse.com it works, its simplpe, its cheap.

aka.ralliart15

iTrader: (20)

It should pick up some power, that's what I'm going with when I go SD for my Red.

tweaker41

iTrader: (36)

STM sells a 4" intake as well I believe.

localtoys73

iTrader: (24)

i wonder if ets makes one

all my other pipes are ets id like to stick to the same

aka.ralliart15

iTrader: (20)

^^I checked their site and they dont but maybe if you contact Michael. Either way all you need is a 45 degree bend 4" pipe, one couplers, two clamps and a 4in KN filter that already comes with a clamp and you're set, its just a piece of pipe anyways.

binky

iTrader: (11)

Street Tuned Motorsports makes one:

http://www.streettunedmotorsports.co...ntake_pipe.htm


-Bink

freshevo8

iTrader: (16)

PM'd

aka.ralliart15

iTrader: (20)

^^^that pipe looks good but remember to tell them you need the 4" to 3 1/2" reducer not the 4" to 4" coupler, cause thats what comes with it.

l2r99gst

iTrader: (2)

I got a 4" from Dejon. You can have make any custom combination of parts that you want (DV dump tuve, nipple for breather hose, etc). Very nice piece.