intercooler comparison test
#1
intercooler comparison test
has there ever been a comparison test between different brands??
if so can someone link me to the page cause i cant find it, i only see a few individual test but nothing solid with back to back testing.
which ic is the best- ets, br, agp, ams, garrett, perrin, ect?
how big of a difference is it between them as far as cooling efficiency & making power go's??
i am very interested to know!
if so can someone link me to the page cause i cant find it, i only see a few individual test but nothing solid with back to back testing.
which ic is the best- ets, br, agp, ams, garrett, perrin, ect?
how big of a difference is it between them as far as cooling efficiency & making power go's??
i am very interested to know!
#2
Evolving Member
iTrader: (13)
Join Date: Jul 2008
Location: delaware
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Look on buschurracing.com Dave has test results in his forum from a lot of different combinations. Real good info. I'll post a link later when I can get off my iPhone.
not dyno information but good info on cooling ability which is what a front mount is all about. the cooler and more consistent the charge the more power you will make safely.
i would personally recommend anything with a garret core cbrd, buschur, even ets offers one. if i had to choose one i would support cbrd but some would say im biased.
link to buschurs testing http://buschurforums.com/forum/showt...-info-mixed-in
Jeff
not dyno information but good info on cooling ability which is what a front mount is all about. the cooler and more consistent the charge the more power you will make safely.
i would personally recommend anything with a garret core cbrd, buschur, even ets offers one. if i had to choose one i would support cbrd but some would say im biased.
link to buschurs testing http://buschurforums.com/forum/showt...-info-mixed-in
Jeff
Last edited by atkins; Feb 10, 2010 at 10:46 AM.
#5
Evolving Member
iTrader: (13)
Join Date: Jul 2008
Location: delaware
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
mike will kill me for saying this but i switched my ets 3.5 inch core out for a garret 3.8 inch core and made significantly more power. the dynos were not done on the same day but temps were .03 of a degree different from day to day and it was 25% more humid when i dynoed the garret core. (Raining outside). +27whp/19wtq take it for what its worth.
jeff
jeff
Trending Topics
#10
Evolving Member
Join Date: Oct 2007
Location: savannah
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
mike will kill me for saying this but i switched my ets 3.5 inch core out for a garret 3.8 inch core and made significantly more power. the dynos were not done on the same day but temps were .03 of a degree different from day to day and it was 25% more humid when i dynoed the garret core. (Raining outside). +27whp/19wtq take it for what its worth.
jeff
jeff
Thread
Thread Starter
Forum
Replies
Last Post
wowzers
Evo Engine / Turbo / Drivetrain
39
Jan 12, 2020 01:11 AM
mrfred
Vendor Service / Parts / Tuning Review
68
Jul 13, 2017 11:22 AM
wowzers
Evo General
5
Feb 15, 2016 08:01 AM
35, buscher, buschur, comparison, dyno, ets, evo, evolution, garret, intercooler, intercoolers, lancer, sti, test, tester