boostinggg

iTrader: (-1)

I was just woundering what internals i should use in my evo 8 with a 6262? im looking for 650whp sorry if this is in the wrong place...

Chele

iTrader: (16)

Your going to build this motor yourself?

boostinggg

iTrader: (-1)

yeah ... i just dont know what to use or whats best for the turbo i have and the hp i wanna make

Force-Fed Performance

iTrader: (46)

You could go with anything from Eagle, Crower, Manley on the rods to JE, Wiseco, Ross on the pistons.. If you need some help shoot me a PM with your best deal on what you need. You could spend anywhere from 1000 to 2000 on pistons/rods/bearings

Chele

iTrader: (16)

I am very close to 600 on pump, and I use Manley rods and pistons.

TTP Engineering

iTrader: (465)

You can probably get by wit Hbeam Eagle or Manley rods for that power level.

CP pistons.

We have all of these in stock and the pistons are the same units we use in our TTP Racing Engines.

407-475-0100 if you have any questions.

ranz

iTrader: (15)

you can go with Manley pistons and rods.

EvilEVO800hp

iTrader: (2)

im torn between eagle and manley rods for my 2.3 build

awdordie

iTrader: (1)

Y would u bring This back from the dead to post what your torn between? For gods sake please check dates before posting