Evosick2332 quest for a low 10 sec pass on Stock Motor
#1
Evosick2332 quest for a low 10 sec pass on Stock Motor
Well guys i have decided to go a different route for the beginning of the season. I want to build my motor and have it done by the bushur shootout, but i have decided to push my stock motor a little harder for now. The car is on the stock block, stock ECU, on a Fp Red on 27 pounds and the car went 10.83 at a 126 with a 1.53 60 on BFG Drag Radials with full street weight at the end of last season. The car is going to have a few changes when i bring her to the track in april. The whole winter its been sitting in the garage just waiting for the weather to clear haha. A couple weeks ago we put on the JMF Drag Intake manifold with the boomba throttle body and the Fp J pipe. I am dropping my car off next week to get my trans rebuilt and with the Evo 8 3rd and 4th gear. All of my passes I did, i was shifting to 5th Car is going to go on speed density on 110 on 32 pounds.
I know its going to be hard as hell but the car has performed awesome to this point and im really excited to see what it can do after these extras. My goal is for a 10.20 somewhere around there. Mod List that will lead up to the first track day:
Fp red 80mm (ported)
JMF 02 Dump
Stock exhaust mani ported and coated
Custom intake
Custom 3" Exhaust
Buschur UICP
Kelford 272s
Supertech dual springs and retainers
AMS FMIC
AMS Lower
780cc injectors
Strictly Modified Fuel Rail
JMF Drag Intake Mani
AMS Small Batter
Quartermaster Twin Disc
Built trans by Strictly Modified
Tein S tech lower springs
Rota Torques
BFG Drag Radials
JDM Tails
Shearer Fab stock replacement manifold
Speed Density on 32 pounds
stock motor
Built and tuned by Strictly Modified
Heres a few pics of the car
I will update this thread as i go with any updates with the car. The plan is to take the car to the track in around mid April, so i will keep everyone posted. I want to thank Strictly Modified for all there help and hard work they did on my car to get it where its at today. Wouldnt have done it without them. We are anxious to get this thing to the track. I made this thread as simple as i could so hope you guys like it and will follow my quest for that low 10 sec pass. Thanks
I know its going to be hard as hell but the car has performed awesome to this point and im really excited to see what it can do after these extras. My goal is for a 10.20 somewhere around there. Mod List that will lead up to the first track day:
Fp red 80mm (ported)
JMF 02 Dump
Stock exhaust mani ported and coated
Custom intake
Custom 3" Exhaust
Buschur UICP
Kelford 272s
Supertech dual springs and retainers
AMS FMIC
AMS Lower
780cc injectors
Strictly Modified Fuel Rail
JMF Drag Intake Mani
AMS Small Batter
Quartermaster Twin Disc
Built trans by Strictly Modified
Tein S tech lower springs
Rota Torques
BFG Drag Radials
JDM Tails
Shearer Fab stock replacement manifold
Speed Density on 32 pounds
stock motor
Built and tuned by Strictly Modified
Heres a few pics of the car
I will update this thread as i go with any updates with the car. The plan is to take the car to the track in around mid April, so i will keep everyone posted. I want to thank Strictly Modified for all there help and hard work they did on my car to get it where its at today. Wouldnt have done it without them. We are anxious to get this thing to the track. I made this thread as simple as i could so hope you guys like it and will follow my quest for that low 10 sec pass. Thanks
Trending Topics
#10
Evolving Member
iTrader: (20)
Join Date: Oct 2009
Location: Dayton, Ohio
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Love what your doing I'll prob be doing the same towards the end of summer before the winter build. Tryin to hit an 11.3 on dots with the white first. Good luck!
By the way. You shouldve joined the army.
By the way. You shouldve joined the army.