Spark plugs help
#17
Evolved Member
iTrader: (37)
Join Date: Sep 2003
Location: Spec-Ops Motorsports, Fayetteville, NC
Posts: 3,146
Likes: 0
Received 2 Likes
on
2 Posts
Please pay attention before you post info like this... the OP lists and VIII in his information. If you have him start gapping plugs that tight on a VIII without running meth or anything like that, he is going to be replacing plugs quite quickly, and id imagine misfiring quite a bit.
#20
Evolved Member
iTrader: (2)
Join Date: May 2008
Location: Kirkland, WA
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
You are on a IX...
Please pay attention before you post info like this... the OP lists and VIII in his information. If you have him start gapping plugs that tight on a VIII without running meth or anything like that, he is going to be replacing plugs quite quickly, and id imagine misfiring quite a bit.
Please pay attention before you post info like this... the OP lists and VIII in his information. If you have him start gapping plugs that tight on a VIII without running meth or anything like that, he is going to be replacing plugs quite quickly, and id imagine misfiring quite a bit.
#21
Evolved Member
iTrader: (37)
Join Date: Sep 2003
Location: Spec-Ops Motorsports, Fayetteville, NC
Posts: 3,146
Likes: 0
Received 2 Likes
on
2 Posts
added boost doesnt mean meth... i run 28 to 30 psi all day long, but i am on a built bottom end. My plugs are gapped at .024 and i have no issues. I am running a COP though too, so that could be why. I read your mod list and it didnt say meth, which is why i commented how i did.
#22
Evolved Member
iTrader: (2)
Join Date: May 2008
Location: Kirkland, WA
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
added boost doesnt mean meth... i run 28 to 30 psi all day long, but i am on a built bottom end. My plugs are gapped at .024 and i have no issues. I am running a COP though too, so that could be why. I read your mod list and it didnt say meth, which is why i commented how i did.
#24
Evolved Member
Thread Starter
iTrader: (2)
Join Date: May 2009
Location: cali
Posts: 512
Likes: 0
Received 0 Likes
on
0 Posts
Alright so i went to pepboys again and the dude that gave me the spark plugs were there. I told him he might of gave me the wrong one and he admitted that he did. The new ones are bpr7eix. Or do i need the bpr7es? Yes i have a evo 8. Does those plug matters?
#25
Newbie
iTrader: (2)
Join Date: Sep 2008
Location: 908 - NJ
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
http://www.lancershop.com/customer/p...?productid=335
"Tech Tip: These plugs DO NOT come pre-gapped. We recommend purchasing the spark plug gapper tool, seen below."
"Tech Tip: These plugs DO NOT come pre-gapped. We recommend purchasing the spark plug gapper tool, seen below."