Mikey's LR2.4 MIVEC 10:1 Motor Build
#586
Evolved Member
iTrader: (9)
Join Date: Jul 2009
Location: INDIANA
Posts: 505
Likes: 0
Received 0 Likes
on
0 Posts
Rock , MIkey, anybody,
Is 2500 a good deal for built block shipped no core for 2.0? wiseco pistons, acl baerings howard billet rods and it's from the "700 whp partout thread"
I'll begin a build thread in October ' 10 . Mikey, you should have your cams then lol. J/k man. you'll be good when you get the cams.
Is 2500 a good deal for built block shipped no core for 2.0? wiseco pistons, acl baerings howard billet rods and it's from the "700 whp partout thread"
I'll begin a build thread in October ' 10 . Mikey, you should have your cams then lol. J/k man. you'll be good when you get the cams.
#596
Evolved Member
iTrader: (78)
any motor that you buy unless you are there while they are doing it you need to get it and take it to a shop have them take it apart make sure its cleaned nothing damaged everything is in working order the crank turns etc and since they have it apart take the block and crank and have it cleaned at a machine shop. YOU ALSO WANT TO MAKE SURE YOU GETTING THE PARTS YOU PAID FOR!!!. Thats a huge issue now with people saying its built and its not. Im a perfect example had i just dropped my block in no telling how long it would have lasted. Had some spiderwebs in there dirty inside and one of the ibeam rods was shaved now of course only cost me anew ibeam rod and had to wait a week for machine shop to wash it all but now i know its A1 and ready for action. also got all the parts i paid new i was told was in it. lol and he thought they were h beam turns out they were i beam even better deal