FP Black intake options
#1
FP Black intake options
Hello. I will be ordering up my new FP Black this week and was wondering about my choices regarding intake tubes. I am on the AEM EMS and SD, so no need for a recirc pipe, MAF, etc. My only choices seem to be:
1. Dejon
2. FP
3. PPI
I don't like the FP one and much rather have a pipe over a silicone hose. Can anyone provide me with details of others available?
1. Dejon
2. FP
3. PPI
I don't like the FP one and much rather have a pipe over a silicone hose. Can anyone provide me with details of others available?
#3
I built my own:
Parts List:
1 - 3.25" - 4" silicone Reducer/coupler
1 - Spectre 4" aluminum 45 elbow part# 9749
2 - 4" t-bolt clamps (could use worm-gear clamps)
1 - 3.25" worm gear clamp
1 - 4" K&N Filter, part# RE-0870
I cut 1" off of the turbo side of the 45* elbow to get the filter to clear everything, everything else should be self-explanitory.
Total cost was under $90.
Spectre also has a 22* 4" elbow (part# 9729) that 'might' work to lay the filter down flater.
John-
Parts List:
1 - 3.25" - 4" silicone Reducer/coupler
1 - Spectre 4" aluminum 45 elbow part# 9749
2 - 4" t-bolt clamps (could use worm-gear clamps)
1 - 3.25" worm gear clamp
1 - 4" K&N Filter, part# RE-0870
I cut 1" off of the turbo side of the 45* elbow to get the filter to clear everything, everything else should be self-explanitory.
Total cost was under $90.
Spectre also has a 22* 4" elbow (part# 9729) that 'might' work to lay the filter down flater.
John-
Last edited by JohnnyTSi; Dec 6, 2013 at 06:44 AM. Reason: Fixed Picture links
Trending Topics
#12
#14
You probably won't need anything larger than 3.5".
A 4" pipe may get in the way of the wiring harness draped over the transmission case.
Here's my setup - 3.5" PPI pipe and Amsoil 7" filter. The 9" takes up too much up the engine bay.
A 4" pipe may get in the way of the wiring harness draped over the transmission case.
Here's my setup - 3.5" PPI pipe and Amsoil 7" filter. The 9" takes up too much up the engine bay.