Ekoy

iTrader: (4)

I replaced my Injector clips with EZ squeeze clips. Ever sence I did it, I'm afraid I might of put the wires in the wrong order. I tried searching for hours, and i cannot find a wiring diagram. This is for a 2005 Evolution 8 GSR.

Colors are from Left to right, same as clips, from left to right as if you were facing your engine bay.



Injector Clip #1 (closest to timing belt)
Orange, red


Injector Clip #2
White/Red stripe, Red/white stripe


Injector clip #3
Green, red/green stripe


Injector Clip #4 (closest to trans)
Red, Red/black stripe

Thanks for any help. Im so close to finishing my car, Its just the little things I got to figure out.

Jmelocik@Spec-Ops

iTrader: (19)

From Timing belt side to transmission side my unmodified injector wiring is as follows:
#1 orange, red (mine has gold spots on it?), #2 white w/thin red stripe, red w/thin white strip, #3 Green, red w/blue stripe, #4 red, red w/black stripe Let me know if I can be of any further assistance.

Josh

Ekoy

iTrader: (4)

Thanks! Mine seems right on the money. I was looking at the colors with a flashlight so the green and blue difference may just be my eyes at night.