Quiet exhaust for my setup
#46
Evolved Member
iTrader: (21)
Join Date: Jan 2005
Location: SoCal - Where pimpin aint easy
Posts: 950
Likes: 0
Received 0 Likes
on
0 Posts
PM me if you're interested
#47
Evolved Member
iTrader: (33)
hks sport exhaust. Look like stock with stock-style muffler and brown coating, straight 75 mm (3 in = 76.2mm) no tapper, no resonator, quiet cruising, great sound when wot. I got it from MAP Performance, good vendor. I don't have the gt35r like you but the HKS GTII turbo, testpipe, downpipe, cams, AEM intake... still quiet until you give it 100%.
My previous custom Magnaflow with a long resonator and huge muffler is as quiet but it sounds different when WOT. I feel some hp gained with the HKS.
My previous custom Magnaflow with a long resonator and huge muffler is as quiet but it sounds different when WOT. I feel some hp gained with the HKS.
#48
Evolved Member
my 0.02 to quiet down my full tbe no cat, after the catback flange in the long tunnel straightaway next to the drive shaft in place of the piping had 2 18" preforated style resonators welded in, and it is kinda loud at wot, but highway speeds in vacuum under 3k, sounds barely like a catback upgrade only exhaust. So weld in a resonator or two that should quiet it down. good luck.
#50
Evolved Member
iTrader: (16)
my 0.02 to quiet down my full tbe no cat, after the catback flange in the long tunnel straightaway next to the drive shaft in place of the piping had 2 18" preforated style resonators welded in, and it is kinda loud at wot, but highway speeds in vacuum under 3k, sounds barely like a catback upgrade only exhaust. So weld in a resonator or two that should quiet it down. good luck.
Any pics and vids of your setup? My magnaflow is starting to get pretty noisy. Lol
#52
Evolved Member
^^ true 3 inch system ? Obviously you guys have not checked and or measured the inside of the tanabe medallion muffler . It necks down to 2.65 inches , I verified by trimming a piece of cardboard till it slid in.
Also I agree on how good it sounds and how quiet it is , but only as a catback . Once you add downpipe and or replace the stock cat it gets louder than that 95 db. That was the first catback I have owned for my evo and loved it till I opened up the exhaust even more .
Also I agree on how good it sounds and how quiet it is , but only as a catback . Once you add downpipe and or replace the stock cat it gets louder than that 95 db. That was the first catback I have owned for my evo and loved it till I opened up the exhaust even more .
http://www.flickr.com/photos/9969131@N03/6676747677/http://www.flickr.com/photos/9969131@N03/6676747677/ by http://www.flickr.com/people/9969131@N03/, on Flickr
measured like so:
http://www.flickr.com/photos/9969131@N03/6676749631/http://www.flickr.com/photos/9969131@N03/6676749631/ by http://www.flickr.com/people/9969131@N03/, on Flickr
What the hell, more confirmation. I've read here of this tanabe on a 500 WHP car though, so I'm not too worried.
Last edited by wjamyers; Jan 10, 2012 at 08:10 PM.
#53
Evolving Member
iTrader: (3)
Join Date: Jan 2011
Location: San Diego
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
I don't get why people say this -.- its not that quiet. I own one... Maybe there's a different one. But mine is a tiny straight through magnaflow... And its seriously penetratingly deep even at idle. My friend who lives maybe 40-50 yards away from me, knows when i get home. And when in boost it SCREAMS. Maybe its not as loud as per say AMS's exhaust but its pretty loud imo.
#54
Evolved Member
iTrader: (10)
an oval muffler will win like the old rnr stealth and cobb. Some flow is lost but I'm guessing the taper and non 3" hurts flow more.
A custom exhaust with 3" pipe, testpipe, 2 resonators and oval muffler is as quiet/performance that can happen i think. I have never seen one though.
A custom exhaust with 3" pipe, testpipe, 2 resonators and oval muffler is as quiet/performance that can happen i think. I have never seen one though.
#55
Evolved Member
http://www.youtube.com/user/dastalli...1?feature=mhee
although only issue, is in my videos im going wot, so no really any filming of showing off the cars quietness. But trust me, welding in those resonators quieted the car down, itll take a while because the resonators i guess you would say have to break in to start quieting down. But it did the job imo.
Thread
Thread Starter
Forum
Replies
Last Post
FERNO
Evo Engine / Turbo / Drivetrain
295
Jan 30, 2012 10:31 AM
04Evo851374
Evo X Engine / Turbo / Drivetrain
28
Mar 5, 2011 04:59 PM