FP HTA3794r Forward Facing manifold, sparktech, awd motorsports, etc.. Build
Sep 26, 2010, 10:33 AM
#1
Evolving Member
Thread Starter
iTrader: (68)
Join Date: Sep 2009
Location: FL
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
FP HTA3794r Forward Facing manifold, sparktech, awd motorsports, etc.. Build
Hey guys I've been peicing together my build for a couple months now. I had a pt6262 on my stock motor with meth before and made 604awhp, but now i want to go for a real street monster/drag setup. So far i switched out my ets uicp with a forge rs bov, in favor for a tial 50mm bov with buschur ss uicp. I have sparktech non cdi ignition that i will be using which has been awesome for the last year and a half 
. Also i had a custom inline walboro 255 mad wiyh custom lines to fit to the stock fuel rail and lines. Also i bought gsc springs reatiners kit so i could be able to rev the motor to 10k rpms. I have buschur's ported 65mm throttle body and intake manifold. For now i will br using a low mileage evo 8 transmission and will rebuild my evo 9 tranny once its out as a spare when the evo 8 one lets go. Im still using the competion twin disk which has been working great for me for a couple thousand miles. I bought a forward facing turbo kit off one of the members, which use to be Mike @ AWD Motorsports evo 8 rs that went 8s. Just got my FP HTA3794r in the mail which looks just awesome and was thibking of selling it due to the back housing not fitting my turbo kit, but decided to make a custom o2 housing. I will take some pictures today so you can see how its going! Im going to be using pump gas and going for 9s on straight pump is my goal right now so we will see! AWD Motorsports will be doing the motor and the tuning just need to get the car together first!
. Also i had a custom inline walboro 255 mad wiyh custom lines to fit to the stock fuel rail and lines. Also i bought gsc springs reatiners kit so i could be able to rev the motor to 10k rpms. I have buschur's ported 65mm throttle body and intake manifold. For now i will br using a low mileage evo 8 transmission and will rebuild my evo 9 tranny once its out as a spare when the evo 8 one lets go. Im still using the competion twin disk which has been working great for me for a couple thousand miles. I bought a forward facing turbo kit off one of the members, which use to be Mike @ AWD Motorsports evo 8 rs that went 8s. Just got my FP HTA3794r in the mail which looks just awesome and was thibking of selling it due to the back housing not fitting my turbo kit, but decided to make a custom o2 housing. I will take some pictures today so you can see how its going! Im going to be using pump gas and going for 9s on straight pump is my goal right now so we will see! AWD Motorsports will be doing the motor and the tuning just need to get the car together first!Last edited by evoforlife; Dec 16, 2010 at 11:20 AM.
Sep 26, 2010, 02:30 PM
#6
Evolving Member
Thread Starter
iTrader: (68)
Join Date: Sep 2009
Location: FL
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
some pictures of where im at so far sorry for the link i cant seem to get the images to show up on the thread i always need to do a link, but heres some pictures so far!
Oct 7, 2010, 09:05 AM
#7
Evolving Member
Thread Starter
iTrader: (68)
Join Date: Sep 2009
Location: FL
Posts: 448
Likes: 0
Received 0 Likes
on
0 Posts
Everything is almost together had to make an o2 housing to fit the hta3794 in and thats all welded up and done, now just need to tighten everything up and make a ghetto intake to my maf so yhe car will actually make it to awd motorsports
Trending Topics
Oct 7, 2010, 08:00 PM
#13
Evolved Member
iTrader: (62)
Join Date: Jul 2005
Location: Nashville, TN
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
dayum... that's nice.. and did you TS that or open? just wondering how much it clears everything. Did you have any wiggle room and did you keep AC and PS?
