skipperbrent

iTrader: (3)

i just recently replaced a engine in my 06 evo mr, along with trans transfer case and ECU. i got the car all put back together and now its not getting fire to the plugs. i replaced the cam position sensor and the crank position sensor. my fuel pump is not coming on either. ive checked all the fuses and now im stumed. Any suggestions? pm me for my number if that would be faster.

SparkTech

iTrader: (141)

You said you checked all fuses. Did you check the ones under the hood as well as inside the car?

michael_cano

could it be your engine harness to your body harness and pinning of the ecu? i had the same problem when i did an engine swap on my 91 mr2t. all i needed was the ecu to be repinned

skipperbrent

iTrader: (3)

how do you repin an ECU?

skipperbrent

iTrader: (3)

all fuses under hood have been checked

skipperbrent

iTrader: (3)

any suggestions? i really need the car to run again

SparkTech

iTrader: (141)

do you have a multi-meter? Test the coil harness wires, the white with red stripe for 12 volts with ignition on.

JakeTheVIII

iTrader: (35)

sounds like immobilizer or something... check this thread out a few pages into it... https://www.evolutionm.net/forums/ev...5-project.html

skipperbrent

iTrader: (3)

thanks im going to try that here in a bit ill let you know how it turns out. how do you disable it exactly?

skipperbrent

iTrader: (3)

just ordered a matching ecu ignition, and immobiliser off ebay hope this works!@

JakeTheVIII

iTrader: (35)

edit

skipperbrent

iTrader: (3)

well got my parts, and the car STILL wouldnt STARt. but was getting spark and fire, so checked the tank and GUESS WHAT! no fuel pump or assembly. so now im on the hunt for one of those

skipperbrent

iTrader: (3)

if anyone has a stock fuel pump assembly i need one