Comparison of Buschur Muffler and Magnaflow
#31
Evolved Member
Thread Starter
iTrader: (1)
Join Date: Feb 2003
Location: Chicago
Posts: 900
Likes: 0
Received 0 Likes
on
0 Posts
Diesel,
The difference is very noticeable on a sound system with a decent subwoofer. My wife and neighbors were able to tell the difference The major difference is the frequency of the two. One is louder at 80hz, the other is lowder at 30hz. I was able to turn my radio down 20% since the swap.
The difference is very noticeable on a sound system with a decent subwoofer. My wife and neighbors were able to tell the difference The major difference is the frequency of the two. One is louder at 80hz, the other is lowder at 30hz. I was able to turn my radio down 20% since the swap.
#33
Evolved Member
Thread Starter
iTrader: (1)
Join Date: Feb 2003
Location: Chicago
Posts: 900
Likes: 0
Received 0 Likes
on
0 Posts
At WOT it is 1/2 as loud as before. Very low bass note. I can actually her my engine again. Wife states that the car can be hear from only one block from the house now as opposed to two.
#34
Evolved Member
Join Date: May 2003
Location: Vancouver, WA
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
That is so true. My wife say's she can hear me from several blocks away, and she is not to found of the sound. Im used to it now, but would like to drive through a parking lot and not set off all the alarms....lol....
How much for the Magnaflow with shipping?
How much for the Magnaflow with shipping?
#35
I like the way the buschur muffler sounds more than the magnaflow. To me, the buschur is more deep, throaty, and RAW(just what i'm looking for)! Reminds me of the sound of my old neighbor's supra. That thing sounded like a space ship. If you could, get some full throttle runs on video. I'm very interested to hear what it sounds like when you're gunning it. I want my EVO to sound SCARY when i'm on it and mean when i'm daily driving
#37
Evolved Member
iTrader: (53)
mr decibel,
You said you called the shop twice with no help. What do you mean and who did you talk to?
Jarrod is great, but he hasn't installed a system on an EVO yet, so he may not have been able to give you help. Not sure if this is the case.
I went back and looked at the jig we build the systems in. I wanted to make sure there isn't a difference in how the Magnaflow muffler sits in the fixture compared to ours. There is no difference.
The two parts should fit identical. I am at a loss of what else to say. I know it is a pain in your butt, if you want to though you can send the muffler back and I can double check it in the fixture to make sure. I'll do what I have to so you'll be happy, that's for sure.
I would be glad to adjust it for free if you come by our shop anytime, I am sure you aren't in this state, just making the offer.
David Buschur
www.buschurracing.com
You said you called the shop twice with no help. What do you mean and who did you talk to?
Jarrod is great, but he hasn't installed a system on an EVO yet, so he may not have been able to give you help. Not sure if this is the case.
I went back and looked at the jig we build the systems in. I wanted to make sure there isn't a difference in how the Magnaflow muffler sits in the fixture compared to ours. There is no difference.
The two parts should fit identical. I am at a loss of what else to say. I know it is a pain in your butt, if you want to though you can send the muffler back and I can double check it in the fixture to make sure. I'll do what I have to so you'll be happy, that's for sure.
I would be glad to adjust it for free if you come by our shop anytime, I am sure you aren't in this state, just making the offer.
David Buschur
www.buschurracing.com
#38
Evolved Member
iTrader: (8)
Join Date: Apr 2003
Location: PA
Posts: 2,601
Likes: 0
Received 0 Likes
on
0 Posts
i'd send it back to check the fitment...
cause from the looks of it the canister is all crooked...
can you bend the hanger to make it sit right...?
cause from the looks of it the canister is all crooked...
can you bend the hanger to make it sit right...?
Last edited by Diesel; Dec 8, 2003 at 09:16 AM.
#39
Evolved Member
iTrader: (8)
Join Date: Apr 2003
Location: PA
Posts: 2,601
Likes: 0
Received 0 Likes
on
0 Posts
on 2nd listening and turning up the sound i could hear the difference...
but you want bassy...?
http://home.comcast.net/~ckneasel/MVI_0051.AVI
turn up the volume...
but you want bassy...?
http://home.comcast.net/~ckneasel/MVI_0051.AVI
turn up the volume...
#40
Evolved Member
Thread Starter
iTrader: (1)
Join Date: Feb 2003
Location: Chicago
Posts: 900
Likes: 0
Received 0 Likes
on
0 Posts
Diesel,
I tried bending the hanger, helpded very little. I will be going under one last time to try to adjust for the hell of it. I really don't think it will help much, but I am a perfectionist. I will keep you posted.
I tried bending the hanger, helpded very little. I will be going under one last time to try to adjust for the hell of it. I really don't think it will help much, but I am a perfectionist. I will keep you posted.
#41
Evolved Member
iTrader: (53)
Bending the hanger is not the answer unless it was somehow bent in shipping, unlikely since it is in a box.
When you get right down to it there are only two adjustments to be made to get the system lined up. The downpipe is a fixed part, no adjustment, the cat or offroad pipe is straight, no adjustment. The cat back pipe and muffler have bends in them, these are the only two parts that can effect the up and down of the muffler.
Maybe that will help, I hope so.
David Buschur
www.buschurracing.com
When you get right down to it there are only two adjustments to be made to get the system lined up. The downpipe is a fixed part, no adjustment, the cat or offroad pipe is straight, no adjustment. The cat back pipe and muffler have bends in them, these are the only two parts that can effect the up and down of the muffler.
Maybe that will help, I hope so.
David Buschur
www.buschurracing.com
Thread
Thread Starter
Forum
Replies
Last Post
BluEVOIX
Evo Engine / Turbo / Drivetrain
197
Apr 10, 2021 05:05 AM
evoIX15
EvoM New Member / FAQs / EvoM Rules
10
Mar 15, 2007 03:29 PM
schleppy
Vendor Service / Parts / Tuning Review
8
May 18, 2006 08:49 AM