Tomei arms m7960
May 2, 2014, 10:00 PM
#47
Evolving Member
Can You put picture of Yours engine bay? What intake do You have?
May 3, 2014, 03:25 AM
#48
yungchian.chen,
The price seems reasonable but how you deal with the transport arrangement and taxation?
Do mind to share the link etc... hope to get direction on this.
The price seems reasonable but how you deal with the transport arrangement and taxation?
Do mind to share the link etc... hope to get direction on this.
Last edited by pangyau; May 3, 2014 at 03:28 AM.
May 4, 2014, 05:47 AM
#54
Newbie
Join Date: May 2011
Location: Malaysia
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
My engine spec now:
Fully stock engine, only change greddy 260° easycam
Hks GT2 7460r Kai turbine
Monster sport airbox with k&n filter
Custom big intercooler and 3inches intercooler piping
Hks exhaust manifold, downpipe and silent high power exhuast
Stock injector with walbro 255l/h fuel pump
Ron95 target boost 1.5bar. Don't know can get how many whp??
Fully stock engine, only change greddy 260° easycam
Hks GT2 7460r Kai turbine
Monster sport airbox with k&n filter
Custom big intercooler and 3inches intercooler piping
Hks exhaust manifold, downpipe and silent high power exhuast
Stock injector with walbro 255l/h fuel pump
Ron95 target boost 1.5bar. Don't know can get how many whp??
May 4, 2014, 08:32 AM
#55
Newbie
Join Date: Mar 2014
Location: Oslo
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Carbonlution,
What version of your TOMEI ARMS turbo? With the Blue revised actuator?
TJung,
How much power do you able to make with this turbo?
I believe you use the Blue revised actuator...
This make me confusing to buy or not to buy this turbo.
Some say good but some said not.
What version of your TOMEI ARMS turbo? With the Blue revised actuator?
TJung,
How much power do you able to make with this turbo?
I believe you use the Blue revised actuator...
This make me confusing to buy or not to buy this turbo.
Some say good but some said not.
it was laggy, i also had problems with ALOT! of surging about 5000rpm, and i did NOT have any power at low rpm!
6th speed in about 90KM/T i had to go down to 5th...
With oem turbo i took me about 2sec before i had full boost and car started climbing up
May 4, 2014, 03:28 PM
#56
Newbie
iTrader: (1)
Join Date: Jan 2012
Location: Singapore
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
HKS GTII brand new about 3k plus SGD in Singapore.
You can check out the Singapore Evolution forum as this turbo will comes out in the WTS section occassionally. My friend just bought one used at 1.2k SGD.
You can check out the Singapore Evolution forum as this turbo will comes out in the WTS section occassionally. My friend just bought one used at 1.2k SGD.
May 5, 2014, 06:07 AM
#58
yep! mine was blue. i had less power then with OEM ported turbo, same tuner..
it was laggy, i also had problems with ALOT! of surging about 5000rpm, and i did NOT have any power at low rpm!
6th speed in about 90KM/T i had to go down to 5th...
With oem turbo i took me about 2sec before i had full boost and car started climbing up
it was laggy, i also had problems with ALOT! of surging about 5000rpm, and i did NOT have any power at low rpm!
6th speed in about 90KM/T i had to go down to 5th...
With oem turbo i took me about 2sec before i had full boost and car started climbing up
I think you had some serious problems with your setup. What you are describing is a jacked up setup. And tell me how this 20g turbo makes the same exact power as an OEM turbo.
May 5, 2014, 05:44 PM
#59
yungchian.chen,
What type of cam pulley are you using to pair with Greddy Easy cam? Stock?
I also tuning the ride to run on RON95.
If you want to let go your turbo. Please let me know.
veilside05,
Currency exchange not much favorable to buy stuff in SG at the moment
I've been to SG website... but still no luck.
What kind of setup/Hybrid you made on your TD05-20G turbo? Billet or convert to Ball Bearing?
What type of cam pulley are you using to pair with Greddy Easy cam? Stock?
I also tuning the ride to run on RON95.
If you want to let go your turbo. Please let me know.
veilside05,
Currency exchange not much favorable to buy stuff in SG at the moment
I've been to SG website... but still no luck.
What kind of setup/Hybrid you made on your TD05-20G turbo? Billet or convert to Ball Bearing?
May 9, 2014, 12:10 PM
#60
Evolving Member
Hello, its me again. Ive changed my stock rubber intake tube for metal one and the spool isn't any better. The sound is impressive, but i feel like the turbo spool is even worse. Is it possible? Maybe I should start with changing licp? Or leave it alone :-)