How much Torque & Whp a Stock OEM Mit Clutch can take???
#1
Evolved Member
Thread Starter
How much Torque & Whp a Stock OEM Mit Clutch can take???
Hi,
would really hope to know how much torque & whp a oem mitsubishi clutch can take???
would really hope to know how much torque & whp a oem mitsubishi clutch can take???
#2
Evolving Member
iTrader: (4)
Join Date: Apr 2009
Location: Minnesota
Posts: 120
Likes: 0
Received 0 Likes
on
0 Posts
Maybe, I mean maybe 350ish dynojet if u don't beat on it and launch a lot. But u really should have searched there are tons of threads on here about this. I'm sure this thread will be closed.
#3
Evolved Member
iTrader: (27)
Your going to get a lot of answers. It all comes down to how you drive the car. I made 427ft-lbs/500whp on the stocker for a while with the BBK just fine. When removed by ER at 12k miles the clutch was still brand new looking. But I dont launch the car (but a few times) - those are all freeway pulls/miles. That kind of power launching a few times will dom the stock clutch pretty quick. Ahh nothing feels as nice as the stock clutch though, so nice and silky smooth
#4
Evolving Member
iTrader: (36)
Join Date: Aug 2007
Location: Western Slope
Posts: 416
Likes: 0
Received 0 Likes
on
0 Posts
I've been on the stock clutch since day 1. 37k on it now, made 341/320 93 pump for a while, then 380/380 93+meth, then now 425/446 on E-85. Only been launched once, don't really go crazy and slam through the gears. She still holding strong.
#5
Ever since I started making 310 dyno dynamics (I don't know , 350 ish dynojet? Im not sure how it compares) I started having slight problems on full boost, which has now translated into a fully slipping clutch. I've never launched the car, and I don't even beat on it with freeway pulls or anything - so i'm assuming it was a pre-existing issue brought on by the power increase.
Trending Topics
#9
Evolved Member
Thread Starter
Thanks for sharing Guys...
Well,i hardly launch at all....Just normal driving and speeding once a while...
That's all...
Hope the Clutch can hold 350whp with 45N/Mm of torque...
Well,i hardly launch at all....Just normal driving and speeding once a while...
That's all...
Hope the Clutch can hold 350whp with 45N/Mm of torque...
#12
EvoM Guru
iTrader: (50)
I've got 42K miles on the stock clutch. Never been launched and holding 370 ft-lbs and 410 whp DJ. I got WOT almost every day, mostly in 1st-3rd, sometimes in 4th, never in 5th-6th (don't mind if the clutch can't handle it, but I do mind the $4K repair bill if my 6-speed takes a crap from the torque).
#13
Evolved Member
Thread Starter
here is my other link which show my Mit Oem clutch pictures...
https://www.evolutionm.net/forums/ev...e-rebuilt.html