Need help with oil and water lines for GT35R turbo for my 03 evo 8
#1
Need help with oil and water lines for GT35R turbo for my 03 evo 8
I bought a used GT35R and then a AFI Turbo hot parts kit. However, they did not have the information for the lines anymore.
I called a couple of places and they are saying:
Oil feed: -3 or -4AN lines
Oil Return: -10AN lines
Water lines: -6AN braided, barb fitting with 3/8" silicon hose or pushlock hose
I am not sure about these sizes? The angle of the fittings is main problem and specific to this kit.
Anyone have a AFI turbo kit on their evo?
Any ideas or at least Garrett GT35R specifications for the lines would be great.
Which is the best line type to go with? I assume that braided is the best, but most expensive?
I called a couple of places and they are saying:
Oil feed: -3 or -4AN lines
Oil Return: -10AN lines
Water lines: -6AN braided, barb fitting with 3/8" silicon hose or pushlock hose
I am not sure about these sizes? The angle of the fittings is main problem and specific to this kit.
Anyone have a AFI turbo kit on their evo?
Any ideas or at least Garrett GT35R specifications for the lines would be great.
Which is the best line type to go with? I assume that braided is the best, but most expensive?
Last edited by ryukinevo; Oct 18, 2010 at 04:45 PM.
#2
I bought a used GT35R and then a AFI Turbo hot parts kit. However, they did not have the information for the lines anymore.
I called a couple of places and they are saying:
Oil feed: -3 or -4AN lines
Oil Return: -10AN lines
Water lines: -6AN braided, barb fitting with 3/8" silicon hose or pushlock hose
I am not sure about these sizes? The angle of the fittings is main problem and specific to this kit.
Anyone have a AFI turbo kit on their evo?
Any ideas or at least Garrett GT35R specifications for the lines would be great.
Which is the best line type to go with? I assume that braided is the best, but most expensive?
I called a couple of places and they are saying:
Oil feed: -3 or -4AN lines
Oil Return: -10AN lines
Water lines: -6AN braided, barb fitting with 3/8" silicon hose or pushlock hose
I am not sure about these sizes? The angle of the fittings is main problem and specific to this kit.
Anyone have a AFI turbo kit on their evo?
Any ideas or at least Garrett GT35R specifications for the lines would be great.
Which is the best line type to go with? I assume that braided is the best, but most expensive?
Thread
Thread Starter
Forum
Replies
Last Post
ryukinevo
Evo Engine / Turbo / Drivetrain
4
Feb 8, 2014 09:42 PM
RJSP
Evo Engine / Turbo / Drivetrain
2
Jul 2, 2012 08:07 AM
AFI Turbo
Evo 'For Sale' External Engine / Power
1
Nov 17, 2008 07:39 AM