Staged upgrades for the EVO8 with EMS
Dec 1, 2003, 06:07 PM
#1
Evolving Member
Thread Starter
Join Date: Sep 2003
Location: nj
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Staged upgrades for the EVO8 with EMS
Hello All,
This is our work in progress. Its just a couple of prelimanary pics but more are to come. It will consist of the turbo upgrade and 321 SS tubular manifold, Custom FMIC replacement, SS IC piping (2.5 " to 2.75" from the discharge of the IC), BOV and External gate. I wont go into too much detail till the vending status is approved.
The project should be done this week and tuning of the AEM next week. Stay tuned as we will chronicle the progress on this thread.
EDIT : WHEN WE TODD IS UP AND RUNNING AGAIN THIS IMAGE WILL APPEAR. THE NEW IMAGE IS ON THE THIRD PAGE
This is our work in progress. Its just a couple of prelimanary pics but more are to come. It will consist of the turbo upgrade and 321 SS tubular manifold, Custom FMIC replacement, SS IC piping (2.5 " to 2.75" from the discharge of the IC), BOV and External gate. I wont go into too much detail till the vending status is approved.
The project should be done this week and tuning of the AEM next week. Stay tuned as we will chronicle the progress on this thread.
EDIT : WHEN WE TODD IS UP AND RUNNING AGAIN THIS IMAGE WILL APPEAR. THE NEW IMAGE IS ON THE THIRD PAGE
Last edited by perfworks; Dec 12, 2003 at 06:35 PM.
Dec 1, 2003, 06:10 PM
#2
Evolving Member
Thread Starter
Join Date: Sep 2003
Location: nj
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Here is another from the drivers side to get a better look at the compressor housing and the nice bit of room there is down there.EDIT : WHEN WE TODD IS UP AND RUNNING AGAIN THIS IMAGE WILL APPEAR. THE NEW IMAGE IS ON THE THIRD PAGE
Last edited by perfworks; Dec 12, 2003 at 06:36 PM.
Dec 1, 2003, 06:13 PM
#3
Evolving Member
Thread Starter
Join Date: Sep 2003
Location: nj
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Please excuse the ignorance but if anyone would like to help me with posting theses pics directly to my post rather than and extention link i would appreciate it. Not really sure how to do it.
Thanks in advance.
Thanks in advance.
Dec 2, 2003, 03:10 AM
#7
Evolving Member
Thread Starter
Join Date: Sep 2003
Location: nj
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by HIGH REV
Is the AEM EMS for the Evo out yet? Last I checked on AEM's site, it's still TBA.
Is the AEM EMS for the Evo out yet? Last I checked on AEM's site, it's still TBA.
AEM is only one of a couple of plug and play unit we are programming
Trending Topics
Dec 6, 2003, 09:52 AM
#8
Evolving Member
Thread Starter
Join Date: Sep 2003
Location: nj
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Here are some more pics of the finished manifold, external wastgate plumbing, mounted turbo and partial downpipe.
EDIT : WHEN WE TODD IS UP AND RUNNING AGAIN THIS IMAGE WILL APPEAR. THE NEW IMAGE IS ON THE THIRD PAGE
EDIT : WHEN WE TODD IS UP AND RUNNING AGAIN THIS IMAGE WILL APPEAR. THE NEW IMAGE IS ON THE THIRD PAGE
Last edited by perfworks; Dec 12, 2003 at 06:37 PM.
Dec 6, 2003, 10:09 AM
#9
Evolving Member
Thread Starter
Join Date: Sep 2003
Location: nj
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
here you go
EDIT : WHEN WE TODD IS UP AND RUNNING AGAIN THIS IMAGE WILL APPEAR. THE NEW IMAGE IS ON THE THIRD PAGE
EDIT : WHEN WE TODD IS UP AND RUNNING AGAIN THIS IMAGE WILL APPEAR. THE NEW IMAGE IS ON THE THIRD PAGE
Last edited by perfworks; Dec 12, 2003 at 06:37 PM.
Dec 6, 2003, 10:11 AM
#10
Evolving Member
Thread Starter
Join Date: Sep 2003
Location: nj
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
and another
EDIT : WHEN WE TODD IS UP AND RUNNING AGAIN THIS IMAGE WILL APPEAR. THE NEW IMAGE IS ON THE THIRD PAGE
EDIT : WHEN WE TODD IS UP AND RUNNING AGAIN THIS IMAGE WILL APPEAR. THE NEW IMAGE IS ON THE THIRD PAGE
EDIT : WHEN WE TODD IS UP AND RUNNING AGAIN THIS IMAGE WILL APPEAR. THE NEW IMAGE IS ON THE THIRD PAGE
EDIT : WHEN WE TODD IS UP AND RUNNING AGAIN THIS IMAGE WILL APPEAR. THE NEW IMAGE IS ON THE THIRD PAGE
Last edited by perfworks; Dec 12, 2003 at 06:38 PM.
Dec 6, 2003, 10:12 AM
#11
Evolving Member
Thread Starter
Join Date: Sep 2003
Location: nj
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
EDIT : WHEN WE TODD IS UP AND RUNNING AGAIN THIS IMAGE WILL APPEAR. THE NEW IMAGE IS ON THE THIRD PAGE
one more
Last edited by perfworks; Dec 12, 2003 at 06:39 PM.
Dec 6, 2003, 04:07 PM
#13
Evolving Member
Thread Starter
Join Date: Sep 2003
Location: nj
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
We are doing four stages. Stage I no EMS just upgraded forced induction setup.
I'll pm you the details.
I dont want to step on anyones toes till i set up the AV account here for this site.
I'll pm you the details.
I dont want to step on anyones toes till i set up the AV account here for this site.
Dec 7, 2003, 07:35 PM
#15
Evolving Member
Thread Starter
Join Date: Sep 2003
Location: nj
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
Custom built TO4E
Mini gate external wastegate
Raptor OR Greddy type s BOV
321 SS manifold
3"SS discharge Downpipe and O2 housing flanged to meet existing or upgraded 3" setup.
Upgraded 3.5" bar and plate spearco cooler with complete upper, lower piping
ALL polished Stainless piping for the intercooler and up to the TB. The outlet piping is 2-3/4 to match the stock unit.
Basically EVERYTHING you need to bolt on a new induction setup.
It is good for 350 to 650hp. The same turbo and FMIC.
Stage I is $3700
The AEM fully tuned EMS added on is $1900.
We are working on another plug and play Motec for the vehicle also. At that point we will give the consumer the choice.
There is alot more to the rest of the kit like the couplings and clamps and such but ill go into that later.
If anyone has any questions feel free to contact me.
THE MAF adapter , filter element and ss piping with coupling and t- clamps is an additional $200
650cc injectors - $385
Mini gate external wastegate
Raptor OR Greddy type s BOV
321 SS manifold
3"SS discharge Downpipe and O2 housing flanged to meet existing or upgraded 3" setup.
Upgraded 3.5" bar and plate spearco cooler with complete upper, lower piping
ALL polished Stainless piping for the intercooler and up to the TB. The outlet piping is 2-3/4 to match the stock unit.
Basically EVERYTHING you need to bolt on a new induction setup.
It is good for 350 to 650hp. The same turbo and FMIC.
Stage I is $3700
The AEM fully tuned EMS added on is $1900.
We are working on another plug and play Motec for the vehicle also. At that point we will give the consumer the choice.
There is alot more to the rest of the kit like the couplings and clamps and such but ill go into that later.
If anyone has any questions feel free to contact me.
THE MAF adapter , filter element and ss piping with coupling and t- clamps is an additional $200
650cc injectors - $385
Last edited by perfworks; Dec 24, 2003 at 03:37 PM.